Page 1 of 1
Li150 Special 1968 - Bent stand
Posted:
Wed Mar 06, 2019 1:37 pmby Big Al
When my scooter is on its stand, the front wheel is not off the ground.
I've seen mention of Sticky's suggestion on how to correct this. Can anyone tell me what it was please? I guess I need to put some sort of packing on the two lugs to stop the stand going so far forward.
Re: Li150 Special 1968 - Bent stand
Posted:
Wed Mar 06, 2019 4:31 pmby HxPaul
I've got these stuck on the crossmember behind the stand
https://www.ebay.co.uk/itm/2-STRIPS-STI ... Sw7aNcfkK4 Just cut off the large balance weights on the strips.
Re: Li150 Special 1968 - Bent stand
Posted:
Wed Mar 06, 2019 6:45 pmby Andyf
Don't the lugs on the stand sometimes get overstressed and bend over a bit?
Re: Li150 Special 1968 - Bent stand
Posted:
Wed Mar 06, 2019 11:24 pmby Big Al
Thanks HxPaul. That sounds like a very good idea.
Re: Li150 Special 1968 - Bent stand
Posted:
Thu Mar 07, 2019 1:41 amby Fast n Furious
Avoid sitting on your scooter with the stand down. This what usually causes it.
Re: Li150 Special 1968 - Bent stand
Posted:
Fri Mar 15, 2019 2:09 pmby Rich Oswald
Why would you want the front wheel off the ground, it just looks wrong imo.
Rich'
Re: Li150 Special 1968 - Bent stand
Posted:
Fri Mar 15, 2019 4:31 pmby Hat
Front wheel isn’t supposed to be off the ground with the stand down, it should still be just in contact with tbe ground