Dc electrics
Posted: Mon Oct 21, 2019 3:06 pm
Hi all
This has got me stumped so I’m putting it out there for the lecy boffins as it doing my nut in.
Basically I’ve a mb simple loom and converted over too dc, Stator, podtronics wassel, dc junction box and battery 7amp.
Fitted it while following the mb instruction on his site which went ok, no issues there.
I have led side and rear taillight and normal 35/35 watt headlight bulb. Also run dc for my twat nav and phone.
My problem arrives when I switch on my headlight and within 15 mins my battery has drained
Now I’ve measured the voltage coming out of the Stator( both Yellows) and it’s 12v and no more. Same with the red leaving the wassel into the Dc Juction box. Should it be more than 12v too keep topping up the battery or do I have a bigger problem than that Hate electrical
Many thanks
Shane
This has got me stumped so I’m putting it out there for the lecy boffins as it doing my nut in.
Basically I’ve a mb simple loom and converted over too dc, Stator, podtronics wassel, dc junction box and battery 7amp.
Fitted it while following the mb instruction on his site which went ok, no issues there.
I have led side and rear taillight and normal 35/35 watt headlight bulb. Also run dc for my twat nav and phone.
My problem arrives when I switch on my headlight and within 15 mins my battery has drained
Now I’ve measured the voltage coming out of the Stator( both Yellows) and it’s 12v and no more. Same with the red leaving the wassel into the Dc Juction box. Should it be more than 12v too keep topping up the battery or do I have a bigger problem than that Hate electrical
Many thanks
Shane