LCGB Forums

The ability to post messages is restricted to LCGB members. Any questions contact us at lcgbadmin@googlemail.com

Steering lock

Technical help for Series one, two and three Lambrettas. Models include the Li, Li Special, TV, SX, GP, Serveta and API/SIL models

Steering lock

Postby gizmo » Sat Feb 15, 2020 1:40 pm

Are any pattern steering locks slightly narrower than others. Just had a right mare getting it in then knocked the Blooming thing in too far and couldn't shift it so ended up drilling it out trying not to scratch nice new paint :) Should have welded up opening. Never use stupid thing
gizmo
 
Posts: 632
Joined: Sat May 31, 2014 6:43 pm

Re: Steering lock

Postby Toddy » Mon Mar 16, 2020 2:45 pm

I wouls say probably yes i usually use the Casa one in both Series1/2 and 3 and usually a good fit unless there is excessive paint in the opening
User avatar
Toddy
 
Posts: 9684
Joined: Tue May 13, 2014 9:58 pm
Location: East Yorkshire

Re: Steering lock

Postby gizmo » Mon Mar 16, 2020 9:04 pm

Toddy wrote:I wouls say probably yes i usually use the Casa one in both Series1/2 and 3 and usually a good fit unless there is excessive paint in the opening
It was a casa one I destroyed so I tried an Indian one and it was slightly narrower. Bit of a rub round with emery paper and it went in without too much force :roll:
gizmo
 
Posts: 632
Joined: Sat May 31, 2014 6:43 pm


Return to Series 1, 2 & 3

Who is online

Users browsing this forum: No registered users and 18 guests