Side panels

[Delboyli150]

Hi can anyone tell (or send a link) to where I can get something to tie down my panels, rather than a lock. I have seen some stuff including a boat tie fastener on some customs, any ideas to share

[gaz_powell]

Classic car leather bonnet straps are popular.
I've got a set to put on my s type but can't bring mesel to drill the panels

[HxPaul]

try these viewtopic.php?f=10&t=753&p=4660&hilit=side+panel+security#p4660

[landybretta]

I have a Silver Special with roller type handles.
I put a thread each side of the bracket. (5 minute job if you have access to a suitable die)
I cut a suitable piece of rubber and put a hole through the centre.
I put this on the end of the bracket after fastening the panels and then fit a nyloc nut.
Not fool proof but will put off or delay anyone after your panels

[HxPaul]

I have used a jubilee clip on the bracket,once the roller and the panel have been fitted,on the end of the bracket.You only need a screwdriver to remove it,but a thief would twist the panel handle only to find it wont move and move on to the next scooter.

[Delboyli150]

Thanks guys, some good ideas, it was more to stop panels falling off, rather than being nicked,