Page 1 of 1

Clutch slip..... Oh no its not...

PostPosted: Sat Jun 12, 2021 7:48 pm
by gaz_powell
Recently rebuilt my clutch, same spec as before as many miles of good service.... Surflex B 4 plate with AF GT springs.

I'd put a Fresco pipe on for a change and first real trip out was getting what felt a bit like clutch slip at about 6k rev,... Blamed the Fresco so went back to taffy copy, which I'd done loads of miles on... Same thing, couldn't understand why, so instead of a ride out.... It was overalls on and dived in....

Oil looked okay, stripped clutch and it was brand new, springs okay etc as it done very limited miles.

So had a look at front sprocket and sliding dog.... Both worn noticeably on their mating surfaces without even comparing to new.

Fortunately spares in stock and rebuilt, by the time I was finished could nt be arsed to test ride, will do that tomorrow

No sign of it on last ride out before I redid the clutch which was only done as I swapped gearbox.

Hopefully sorted.

Was too nice a day to be in the garage.....

Re: Clutch slip..... Oh no its not...

PostPosted: Sun Jun 13, 2021 12:14 pm
by ULC Soulagent
Everyone loves too tinker :D
I’ve just replaced my clutch setup, was dragging ever so slightly so out came the old six plater and in went slimmer 6 plater :D

Re: Clutch slip..... Oh no its not...

PostPosted: Sun Jun 13, 2021 2:51 pm
by gaz_powell
Hopefully I'm sorted, got a Readspeed 5 plate that sits in a standard set up, if I need more.

Haven't been out on bike, decided to the beach and enjoy the sun i missed yesterday.

Test ride next weekend...