Does anyone know what diameter Inner and outer sizes a disc brake cable Should be
Cheers Simon.
LCGB Forums
The ability to post messages is restricted to LCGB members. Any questions contact us at lcgbadmin@googlemail.com
Disc brake cable
4 posts
• Page 1 of 1
Disc brake cable
by a-teamlambretta » Fri Jun 18, 2021 8:10 pm
-
a-teamlambretta - Posts: 503
- Joined: Fri May 30, 2014 9:42 pm
- Location: gilberdyke, east yorks
Re: Disc brake cable
by Warkton Tornado No.1 » Sun Jun 20, 2021 12:59 pm
Hey Simon.
I thought you'd have your answer by now, but 2.5 mm springs to mind. If I get the chance, I'll check what I have today.
The thing is, even the best we can get 'off the shelf could almost certainly be improved, but when I contacted UK Bowden cable manufacturers, they declined politely.
As a Club, the knowledge of reliable sources for the most important cable on any scooter, would be invaluable IMHO.
You may be aware that some manufacturers offer kits for DIY construction. Food for thought?
Cheers,
Mark
I thought you'd have your answer by now, but 2.5 mm springs to mind. If I get the chance, I'll check what I have today.
The thing is, even the best we can get 'off the shelf could almost certainly be improved, but when I contacted UK Bowden cable manufacturers, they declined politely.
As a Club, the knowledge of reliable sources for the most important cable on any scooter, would be invaluable IMHO.
You may be aware that some manufacturers offer kits for DIY construction. Food for thought?
Cheers,
Mark
- Warkton Tornado No.1
- Posts: 2116
- Joined: Sun Jan 11, 2015 1:27 pm
Re: Disc brake cable
by ULC Soulagent » Mon Jun 21, 2021 5:46 pm
Yes 2.5 is out there from Bgm(BGM6409FB) part number.
I’ve used one before going down into an Oiltek remote slave unit for my inboard disc.
I’ve used one before going down into an Oiltek remote slave unit for my inboard disc.
-
ULC Soulagent - Posts: 2137
- Joined: Sun Apr 03, 2016 3:26 pm
- Location: Milton Keynes
Re: Disc brake cable
by a-teamlambretta » Mon Jun 21, 2021 8:40 pm
ULC Soulagent wrote:Yes 2.5 is out there from Bgm(BGM6409FB) part number.
I’ve used one before going down into an Oiltek remote slave unit for my inboard disc.
Yes, ordered one from them on saturday...
Cheers for the input
Simon
-
a-teamlambretta - Posts: 503
- Joined: Fri May 30, 2014 9:42 pm
- Location: gilberdyke, east yorks
4 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 42 guests