LCGB Forums

The ability to post messages is restricted to LCGB members. Any questions contact us at lcgbadmin@googlemail.com

Series 3 LI rear brake set up

Technical help for Series one, two and three Lambrettas. Models include the Li, Li Special, TV, SX, GP, Serveta and API/SIL models

Series 3 LI rear brake set up

Postby ianmoran » Fri Nov 12, 2021 6:34 pm

Rear brake cam on series 3. Should it have a washer inside and outside the engine casing, with the o ring and circlip on the outside?

I dismantled this to service it and only one washer appeared. Then I read it should have 2 ?

Cheers,

Ian
ianmoran
 
Posts: 25
Joined: Tue Sep 12, 2017 8:15 pm

Re: Series 3 LI rear brake set up

Postby Wack » Fri Nov 12, 2021 8:12 pm

One shim on the inside then O ring under the lever.You will find it's hard to fit another shim with the O ring( if using a clutch shaft one) as near impossible to fit the circlip.
Wack
 
Posts: 730
Joined: Sat May 31, 2014 7:11 pm

Re: Series 3 LI rear brake set up

Postby ianmoran » Sun Nov 14, 2021 10:04 pm

Cheers, Wack
ianmoran
 
Posts: 25
Joined: Tue Sep 12, 2017 8:15 pm


Return to Series 1, 2 & 3

Who is online

Users browsing this forum: No registered users and 31 guests