LCGB Forums

Hi all

i have just had a case aqua blasted and its come up a treat and I would like to keep it looking good. is it possible to use something like a clear engine lacquer or maybe a wax of some sort. What have you used successfully?

A regular clean with autosol and it should be reet.

I was thinking of something to coat the case so that it is easy wash the dirt off with a bit of Muck off or similar?

You could make some enquiries with a reputable powder coating firm regarding a high temp clear gloss powder coating.
For a more budget job, then a rattle can coating of VHT engine laquer might do, albeit with a lower lifespan than the powder coated option. Just make sure to choose a brand that is petrol resistant.

Alternatively, you could invest in some polishing kit that will fit your electric drill and apply elbow grease to restore the natural lustre.

I was trying to avoid the powder coaters if possible.

looking on the web I see that Halfords do a bare metal clear engine lacquer suitable for temps of 100 degC , has anyone tried this or something similar before? did it do the job?

TVSi wrote:I was trying to avoid the powder coaters if possible.

looking on the web I see that Halfords do a bare metal clear engine lacquer suitable for temps of 100 degC , has anyone tried this or something similar before? did it do the job?

Don’t forget that the engine acts as a heatsink so temps will be above the 100* margin I’d imagine
Me personally would use the vht exhaust clear coat paint( as stated by FnF) as a decent alternative

I just use a silicone based household polish which repels water and makes the muck easier to wash off

Thanks for all your comments, it has given me food for thought.

Happy New year one and all