LCGB Forums

Has anybody ever run a 22mm SH2 Dellorto through the S1 Framebreather set-up?

Just recently picked one up and wondering if it's at all possible as want the bigger carb on it, but ideally keeping it standard looking?

Yes, there was one in Scootering years ago. He got it to work but it wasn't straight forwards if I remember correctly.

Jon at Urban Scooters in Birmingham has a Framebreather with a S3 TV175 engine and he milled out the round 'F28' air intake to fit an SH1/20. It was done so well that I didn't even notice it until he pointed it out. He's a talented builder, friendly and super helpful. I'd recommend you reach out to him for advice.

I've also seen this at RLC, which is not exactly stock, but looks great.

vegansydney wrote:Jon at Urban Scooters in Birmingham has a Framebreather with a S3 TV175 engine and he milled out the round 'F28' air intake to fit an SH1/20. It was done so well that I didn't even notice it until he pointed it out. He's a talented builder, friendly and super helpful. I'd recommend you reach out to him for advice.

I've also seen this at RLC, which is not exactly stock, but looks great.

Brilliant, thanks for the tip.

Just stumbled across this while searching for something else online. It's a GT186 and the engine was built by Nathan and Dez at DDS.



Those oversize hose clips would keep me awake at night though

vegansydney wrote:Just stumbled across this while searching for something else online. It's a GT186 and the engine was built by Nathan and Dez at DDS.



Those oversize hose clips would keep me awake at night though

That's class too. Gonna go with the Rimini option as I have that style of filter holder. Thanks for the pointers buddy