LCGB Forums

The ability to post messages is restricted to LCGB members. Any questions contact us at lcgbadmin@googlemail.com

Framebreather with 22mm Dellorto

Technical help for Series one, two and three Lambrettas. Models include the Li, Li Special, TV, SX, GP, Serveta and API/SIL models

Framebreather with 22mm Dellorto

Postby asjll1973 » Sun Apr 03, 2022 12:41 pm

Has anybody ever run a 22mm SH2 Dellorto through the S1 Framebreather set-up?

Just recently picked one up and wondering if it's at all possible as want the bigger carb on it, but ideally keeping it standard looking?
asjll1973
 
Posts: 55
Joined: Fri Jun 07, 2019 10:12 am

Re: Framebreather with 22mm Dellorto

Postby Leotech » Sun Apr 03, 2022 5:21 pm

Yes, there was one in Scootering years ago. He got it to work but it wasn't straight forwards if I remember correctly.
User avatar
Leotech
 
Posts: 246
Joined: Wed Jan 13, 2016 7:15 pm

Re: Framebreather with 22mm Dellorto

Postby vegansydney » Sun Apr 03, 2022 10:04 pm

Jon at Urban Scooters in Birmingham has a Framebreather with a S3 TV175 engine and he milled out the round 'F28' air intake to fit an SH1/20. It was done so well that I didn't even notice it until he pointed it out. He's a talented builder, friendly and super helpful. I'd recommend you reach out to him for advice.

I've also seen this at RLC, which is not exactly stock, but looks great.

Image
User avatar
vegansydney
 
Posts: 264
Joined: Wed Aug 07, 2019 2:38 pm
Location: New York City

Re: Framebreather with 22mm Dellorto

Postby asjll1973 » Mon Apr 04, 2022 2:18 pm

vegansydney wrote:Jon at Urban Scooters in Birmingham has a Framebreather with a S3 TV175 engine and he milled out the round 'F28' air intake to fit an SH1/20. It was done so well that I didn't even notice it until he pointed it out. He's a talented builder, friendly and super helpful. I'd recommend you reach out to him for advice.

I've also seen this at RLC, which is not exactly stock, but looks great.

Image


Brilliant, thanks for the tip. ;-)
asjll1973
 
Posts: 55
Joined: Fri Jun 07, 2019 10:12 am

Re: Framebreather with 22mm Dellorto

Postby vegansydney » Thu Apr 07, 2022 3:58 pm

Just stumbled across this while searching for something else online. It's a GT186 and the engine was built by Nathan and Dez at DDS.

Image

Those oversize hose clips would keep me awake at night though :oops:
User avatar
vegansydney
 
Posts: 264
Joined: Wed Aug 07, 2019 2:38 pm
Location: New York City

Re: Framebreather with 22mm Dellorto

Postby asjll1973 » Sat Apr 23, 2022 6:31 pm

vegansydney wrote:Just stumbled across this while searching for something else online. It's a GT186 and the engine was built by Nathan and Dez at DDS.

Image

Those oversize hose clips would keep me awake at night though :oops:



That's class too. Gonna go with the Rimini option as I have that style of filter holder. Thanks for the pointers buddy ;-)
asjll1973
 
Posts: 55
Joined: Fri Jun 07, 2019 10:12 am


Return to Series 1, 2 & 3

Who is online

Users browsing this forum: No registered users and 33 guests