LCGB Forums

The ability to post messages is restricted to LCGB members. Any questions contact us at lcgbadmin@googlemail.com

KNOCKING FRONT HUB BACKPLATE.

Technical help for Series one, two and three Lambrettas. Models include the Li, Li Special, TV, SX, GP, Serveta and API/SIL models

KNOCKING FRONT HUB BACKPLATE.

Postby kevspeed » Thu Apr 14, 2022 3:50 pm

Anybody know if there is a press on bush available to fit over the 'knuckle' that slots into the front hub backplate to stop it knocking?
kevspeed
 
Posts: 90
Joined: Wed Feb 25, 2015 9:37 pm

Re: KNOCKING FRONT HUB BACKPLATE.

Postby duncan1958 » Thu Apr 14, 2022 6:33 pm

I cut a slither from the side of a can of pop.
Seems to do the job.
duncan1958
 
Posts: 136
Joined: Sun Jun 01, 2014 5:14 pm

Re: KNOCKING FRONT HUB BACKPLATE.

Postby Wack » Fri Apr 15, 2022 8:27 pm

Tighten the axle inner nuts real tight then you won't get the knocking.
Wack
 
Posts: 730
Joined: Sat May 31, 2014 7:11 pm

Re: KNOCKING FRONT HUB BACKPLATE.

Postby L111amo » Sat Apr 16, 2022 9:49 pm

A bit of rubber fuel pipe heated up. Does the trick
L111amo
 
Posts: 53
Joined: Wed Feb 12, 2020 8:48 pm

Re: KNOCKING FRONT HUB BACKPLATE.

Postby kevspeed » Mon Apr 18, 2022 12:01 pm

Hi all,i managed t get a small peice of copper pipe into the gap,it seems ok for now fingers crossed!
kevspeed
 
Posts: 90
Joined: Wed Feb 25, 2015 9:37 pm


Return to Series 1, 2 & 3

Who is online

Users browsing this forum: No registered users and 30 guests