Page 1 of 1

Ignition series 2

PostPosted: Thu Apr 28, 2022 2:02 pm
by Specialcase
This is my first ser2 and I’m not sure how original this is? I thought they had a kill button and lock on the side. Anyone got an image of what it should look like? It’s a 1961 model
TIA
Spl

Re: Ignition series 2

PostPosted: Thu Apr 28, 2022 5:08 pm
by nickw
I haven't a picture to show but the top hole should be a kill switch and the lower hole is the place for the steering lock. As can be seen the previous owner has fitted a key switch which instead of the kill switch.

Re: Ignition series 2

PostPosted: Thu Apr 28, 2022 5:09 pm
by dickie
Is it spanish?

Re: Ignition series 2

PostPosted: Thu Apr 28, 2022 5:13 pm
by Storkfoot
Image

1960, Li 125.

Re: Ignition series 2

PostPosted: Fri Apr 29, 2022 4:46 pm
by tim_mason
Or could it be a TV175

Re: Ignition series 2

PostPosted: Sun May 01, 2022 4:06 pm
by Specialcase
No Guys it’s a ‘61 Li150 the livery is some Italian football team! it’s unsiezed so gonna have a go at getting it up and running, no battery, no key and I don’t think it’s an Innocenti ign lock (no number) so may have to get a new one. Clean tank & Carb “ Bob’s your Uncle Charlie’s your aunt” job done! This restoration Malachi is so easy!!

Re: Ignition series 2

PostPosted: Sun May 01, 2022 4:23 pm
by Specialcase
While I’ve got your attention, I can’t work out how the side panels fit on as it came without the panels so I reckon someone’s taken em off. Can’t fine any images in sticky’s or on line - anybody help?
Cheers
Spl

Re: Ignition series 2

PostPosted: Sun May 01, 2022 9:59 pm
by duncan1958
Normally have a bracket each side that is welded to the frame loop.
Sometimes the rear wheel side gets trimmed down to aid removal of the rear wheel.

Re: Ignition series 2

PostPosted: Wed May 04, 2022 9:48 am
by Specialcase
Hey Duncan - would you have a picture of the brackets as I can’t seem to see any on mine. Could be that they were removed as the bike had no side-panels!
TIA
Spl

Re: Ignition series 2

PostPosted: Tue May 31, 2022 3:34 pm
by Specialcase
Thanks for all the info ref ign lock. The side panel fixings have been removed hence it came without side panels, will have to get a new bracket and weld it on!
Ta all

Re: Ignition series 2

PostPosted: Tue May 31, 2022 3:56 pm
by Storkfoot
This might help. I haven’t used one so can’t vouch for them.

https://jbfab.co.uk/product/lambretta-s ... kit-tv-li/

Re: Ignition series 2

PostPosted: Tue May 31, 2022 4:16 pm
by coaster
Storkfoot wrote:This might help. I haven’t used one so can’t vouch for them.

https://jbfab.co.uk/product/lambretta-s ... kit-tv-li/


That looks like a brilliant idea, intended for the left side but looks like it could be fettled to fit both sides possibly

Re: Ignition series 2

PostPosted: Tue May 31, 2022 5:50 pm
by Norrie Bodge
coaster wrote:
Storkfoot wrote:This might help. I haven’t used one so can’t vouch for them.

https://jbfab.co.uk/product/lambretta-s ... kit-tv-li/


That looks like a brilliant idea, intended for the left side but looks like it could be fettled to fit both sides possibly


They are at a different angle
But if you message Jon Betts (JB Fabrication)
I’m sure he can make you one for yours at correct angle

Re: Ignition series 2

PostPosted: Sun Jun 05, 2022 4:46 pm
by fiveo
I have used them and they work perfectly well.