Page 1 of 1

Height

PostPosted: Wed Mar 06, 2024 10:10 am
by Cgt75b
Hi folks

What is the best way to check pick up height between the black box n the magnets please?

Re: Height

PostPosted: Wed Mar 06, 2024 10:18 am
by lofty
personally i stick a bit of masking tape on the side of the pickup, mark the pole heights with marker pen, refit the flywheel and then peer through the hole to try and see if the magnet prongs line up or not..

Re: Height

PostPosted: Thu Mar 21, 2024 10:09 am
by Cgt75b
lofty wrote:personally i stick a bit of masking tape on the side of the pickup, mark the pole heights with marker pen, refit the flywheel and then peer through the hole to try and see if the magnet prongs line up or not..


Cheers Lofty.