LCGB Forums

by **grumpar** » Sat Jan 17, 2015 4:15 pm

Thinking of getting some SCOMADI FORKS STAINLESS STEEL Anybody know what there like

by **dickie** » Sat Jan 17, 2015 8:09 pm

I spoke to a chap who had some on his gp200. He reckoned they were better than original ones.

So I called Pmtuning to order a set but they were out of stock. That was in October and they're still out of stock so good luck!

by **grumpar** » Sun Jan 18, 2015 9:43 am

dickie wrote:I spoke to a chap who had some on his gp200. He reckoned they were better than original ones.

So I called Pmtuning to order a set but they were out of stock. That was in October and they're still out of stock so good luck!

that's not good news i rang them to order a set but didn't get through to anybody shame they look excellent

by **Mag** » Sun Jan 18, 2015 1:22 pm

got them in my TS.

perfect fit. I hadn't realised my new Indian forks were slightly out until i replaced them with the Scomadis and I can now ride hands free in a straight line (it used to dip slightly to the left before).

Quality is excellent so unless you want the exact factory look I don't know why you wouldn't fit them.

by **grumpar** » Sun Jan 18, 2015 4:47 pm

Very nice I need a set

by **mcbrid** » Sun Jan 18, 2015 7:04 pm

I didn't go for the stainless but the 'to paint' ones are really good as well.

Replaced my beat up old Indian ones - rides nice and straight now

Try calling Frank Sanderson instead - he may have stock.

http://www.lambrettainnovation.co.uk/sh ... etta-forks

by **grumpar** » Sun Jan 18, 2015 7:50 pm

cheers i'm looking for some chrome ring (467mm) they just seem to do GP AND Jet :?:

by **mcbrid** » Sun Jan 18, 2015 9:20 pm

Frank will get you whatever PM can get - call him

by **grumpar** » Mon Jan 19, 2015 6:15 pm

mcbrid wrote:I didn't go for the stainless but the 'to paint' ones are really good as well.

Replaced my beat up old Indian ones - rides nice and straight now

Try calling Frank Sanderson instead - he may have stock.

http://www.lambrettainnovation.co.uk/sh ... etta-forks

Is Frank Sanderson PM Tuning ?

by **Digger** » Mon Jan 19, 2015 7:54 pm

No...

by **amb** » Fri Jun 22, 2018 9:24 pm

Are these forks still available and what's the census of opinion if so .

by **amb** » Fri Jun 29, 2018 5:30 pm

nothing then .

by **rossclark** » Fri Jun 29, 2018 7:18 pm

Have you tried calling - as suggested above?

by **68Sxandy** » Fri Jun 29, 2018 9:00 pm

You could try Dave Wilson at Retro Tech Racing, he runs the Scomadi race team and seems to be able to get just about anything, top bloke too.

by **amb** » Tue Jul 03, 2018 1:20 am

Thanks very much 68Sxandy for youre helpful reply .

LCGB Forums

looking at Scomadi stainless forks anyone using them ?

looking at Scomadi stainless forks anyone using them ?

Re: looking at Scomadi stainless forks anyone using them ?

Re: looking at Scomadi stainless forks anyone using them ?

Re: looking at Scomadi stainless forks anyone using them ?

Re: looking at Scomadi stainless forks anyone using them ?

Re: looking at Scomadi stainless forks anyone using them ?

Re: looking at Scomadi stainless forks anyone using them ?

Re: looking at Scomadi stainless forks anyone using them ?

Re: looking at Scomadi stainless forks anyone using them ?

Re: looking at Scomadi stainless forks anyone using them ?

Re: looking at Scomadi stainless forks anyone using them ?

Re: looking at Scomadi stainless forks anyone using them ?

Re: looking at Scomadi stainless forks anyone using them ?

Re: looking at Scomadi stainless forks anyone using them ?

Re: looking at Scomadi stainless forks anyone using them ?

Who is online