LCGB Forums

The ability to post messages is restricted to LCGB members. Any questions contact us at lcgbadmin@googlemail.com

Rear Brake O Ring

Technical help for Series one, two and three Lambrettas. Models include the Li, Li Special, TV, SX, GP, Serveta and API/SIL models

Rear Brake O Ring

Postby col1968 » Mon Jun 09, 2014 5:25 am

Hi, could someone help me please, i have stripped down my rear hub.When putting back together, i am not sure where the rear brake cam o ring goes.Any help would be appreciated.Thanks Col
col1968
 
Posts: 15
Joined: Thu Jun 05, 2014 1:30 pm
Location: Ruskington Lincolnshire

Re: Rear Brake O Ring

Postby Toddy » Mon Jun 09, 2014 6:14 am

There you go

http://www.scooterrestorations.com/lamb ... res-tubes/" onclick="window.open(this.href);return false;
User avatar
Toddy
 
Posts: 9660
Joined: Tue May 13, 2014 9:58 pm
Location: East Yorkshire

Re: Rear Brake O Ring

Postby col1968 » Mon Jun 09, 2014 7:58 pm

Thanks Toddy
col1968
 
Posts: 15
Joined: Thu Jun 05, 2014 1:30 pm
Location: Ruskington Lincolnshire

Re: Rear Brake O Ring

Postby denisiw » Fri Jun 13, 2014 9:43 am

I've sometimes had difficulty getting the circlip on the end of the shaft if this is 'O' ring is fitted.

Something I've noticed about that illustration is that it shows a washer/shim under the circlip, but it is not itemised. It was used on the Li Series 1 but was omitted when the Series 2 came out and thereafter, Innocenti never bothered to remove it from the diagram.

Denis
denisiw
 
Posts: 39
Joined: Wed Jun 04, 2014 5:52 pm
Location: Isle of Wight

Re: Rear Brake O Ring

Postby col1968 » Mon Jun 16, 2014 5:14 am

Thanks Denis, i have noticed this washer/shim too. Cheers Col
col1968
 
Posts: 15
Joined: Thu Jun 05, 2014 1:30 pm
Location: Ruskington Lincolnshire


Return to Series 1, 2 & 3

Who is online

Users browsing this forum: No registered users and 25 guests