battery to provide temp power

[gaz_powell]

Can someone kindly remind me how to connect an external battery to sorts lights out without having to start the bike.

Simplified electronic harness, standard cdi/regulator set up.

Cheers

Gaz

[Wack]

Connect battery + to the loom feed( usually brown) after removing from the regulator,the - to the engine/chassis .

[gaz_powell]

Cheer Wack

That`s what i had in my head but thought i would check

Gaz

[Dazza]

Use a battery charger if you have one..negative croc clip to the Frame and red clip to the brown (normally) once taken out of regulator...

[gaz_powell]

go a fully charged 12v battery and a charger so should be okay

Thanks

Gaz

[foremanbob]

Remember if you are using a car/motorcycle battery that you should have an inline fuse between battery and your loom....

You have the potential to melt your loom if you accidently create a short while you are working on it... A charger has a current limiter built in...