Might seem a daft question but having never mixed and matched before , can a SIL GP200 1st gear be a straight swap for a Italian one ??
Cheers
Gaz
LCGB Forums
The ability to post messages is restricted to LCGB members. Any questions contact us at lcgbadmin@googlemail.com
Gearbox cogs
5 posts
• Page 1 of 1
Gearbox cogs
by gaz_powell » Thu Nov 23, 2017 3:10 pm
- gaz_powell
- Posts: 3092
- Joined: Sat May 31, 2014 7:56 pm
- Location: Hartlepool
Re: Gearbox cogs
by Tractorman » Thu Nov 23, 2017 5:13 pm
I don't think so because the outer diameters of the gears are different. The Indian is 115.3 mm. whilst the Italian is117.5. I think this why the first 'Indian' set I bought locked up once the endplate was fitted.
-
Tractorman - Posts: 7816
- Joined: Mon Jun 02, 2014 3:07 pm
- Location: Lincoln
Re: Gearbox cogs
by gaz_powell » Thu Nov 23, 2017 6:48 pm
Interesting, glad I checked before I bought one......onto the wanted section now !!
- gaz_powell
- Posts: 3092
- Joined: Sat May 31, 2014 7:56 pm
- Location: Hartlepool
Re: Gearbox cogs
by HxPaul » Thu Nov 23, 2017 7:35 pm
Tractorman wrote:I don't think so because the outer diameters of the gears are different. The Indian is 115.3 mm. whilst the Italian is 117.5. I think this why the first 'Indian' set I bought locked up once the endplate was fitted.
Thats not always the case though,some of the 50 tooth Italian and Spanish first gears are 115.3 and some of the Indian ones are 117.5.You only need to look in the back of Sticky's manual.
-
HxPaul - Posts: 1583
- Joined: Fri May 30, 2014 9:18 am
- Location: Halifax
Re: Gearbox cogs
by dscscotty » Thu Nov 23, 2017 9:10 pm
can a SIL GP200 1st gear be a straight swap for a Italian one ??
Italian GP/SX150 will match an Italian 125/200 1st gear!
- dscscotty
- Posts: 717
- Joined: Fri May 30, 2014 7:42 pm
5 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 52 guests