LCGB Forums

The ability to post messages is restricted to LCGB members. Any questions contact us at lcgbadmin@googlemail.com

Skip to content

FRONT HUB

Technical help for Series one, two and three Lambrettas. Models include the Li, Li Special, TV, SX, GP, Serveta and API/SIL models
Post a reply

FRONT HUB

Postby WOO » Fri Dec 08, 2017 6:45 pm

I have replaced all the internals of the front hub and used new fork links, no problems
As i fit the hub to the fork links the fork legs move slightly inwards as i tighten the dome nut. is this normal or should i use spacer washers to stop the fork legs moving inwards even though spacer washers are not shown in the parts book
cheers
WOO
 
Posts: 29
Joined: Tue Dec 15, 2015 9:22 pm
Top

Re: FRONT HUB

Postby Wack » Fri Dec 08, 2017 9:14 pm

You could put slightly thicker washers under the hub half nuts or a wider spacer/shim inside the backplate.
Wack
 
Posts: 730
Joined: Sat May 31, 2014 7:11 pm
Top
Post a reply

Return to Series 1, 2 & 3

Who is online

Users browsing this forum: No registered users and 33 guests

Powered by phpBB® Forum Software © phpBB Group