Vega Airbox Mods
Posted: Mon May 16, 2016 5:05 pm
I'm just starting to carry out some of the Vega mods as detailed in Ken Herlingshaws Manual of Performance and Conversions And was wondering about the Airbox mods
He recommends making a new top hat baffle with 8 x 10mm holes to increase the flow through the filter ,this entails turning one up on a lathe or braising one together from 31mm dia tube ( the standard is 27 mm with 4 x 10mm holes )
So my questions are
A - Does anyone have a remade top hat going spare
B - is there any reason why drilling a number of extra holes in the standard top hat baffle would not achieve the same result
cheers
He recommends making a new top hat baffle with 8 x 10mm holes to increase the flow through the filter ,this entails turning one up on a lathe or braising one together from 31mm dia tube ( the standard is 27 mm with 4 x 10mm holes )
So my questions are
A - Does anyone have a remade top hat going spare
B - is there any reason why drilling a number of extra holes in the standard top hat baffle would not achieve the same result
cheers