LCGB Forums

The ability to post messages is restricted to LCGB members. Any questions contact us at lcgbadmin@googlemail.com

luna 50 control lever washer question

Technical help for Lui, Vega, Cometa, J50, Cento, J125, Starstream.

luna 50 control lever washer question

Postby grumpar » Sun Oct 02, 2016 2:11 pm

Hi i have a quite bad copy of a luna 50 manual showing 3 washers ? on the engine gear control lever i would imagine one is a oil seal with it going between the inside and outside of the engine but can anyone give more detail or post a detailed pic cheers
grumpar
 
Posts: 91
Joined: Fri Dec 12, 2014 8:19 pm

Re: luna 50 control lever washer question

Postby 57Speedster » Mon Oct 03, 2016 1:28 pm

Hi, Not sure if Luna is exactly the same as other J Range, but there is a good parts book on here : http://www.scooterhelp.com/serial/cento.parts.html
My Cento Gear selector shaft has 2 washers, and an O ring oil seal which fits in a groove at the top (lever) end of the shaft.
User avatar
57Speedster
 
Posts: 46
Joined: Fri May 30, 2014 6:32 pm
Location: Darkest Lancashire

Re: luna 50 control lever washer question

Postby grumpar » Mon Oct 03, 2016 4:37 pm

Thanks for the reply Speedster just what i needed, cheers
grumpar
 
Posts: 91
Joined: Fri Dec 12, 2014 8:19 pm

re Lui brass stealing lock

Postby Bindog » Tue Oct 04, 2016 6:03 pm

Hi anybody ever taken a brass stealing lock out of a Lui ,it's side mounted type not the bolt on font one and its in the unlocked position I have no key thanks
Bindog
 
Posts: 7
Joined: Fri Sep 23, 2016 6:19 pm

Re: luna 50 control lever washer question

Postby mickey c » Fri Oct 07, 2016 12:55 am

If it's like a vega lock, there are 2 square shims slid down the front of the lock, tap these out with something thin, the o'clock will come out if these are removed.
mickey c
 
Posts: 180
Joined: Mon Jul 14, 2014 11:03 pm


Return to Luna & J Range

Who is online

Users browsing this forum: No registered users and 4 guests