I will shortly be starting to rebuild this scooter.
I have a new wiring loom (Casa Part No: E 109), and would appreciate help with the placement on the frame and the connections.
One end has Brown/Grey/Green/Black wires.
In the middle there are two separate branches. The first has Grey/Grey/Blue wires, and the next one has Red/Green/Brown/Green wires.
The other end divides into three, each being a slightly different length to the other two. One has Red/Grey, the second has an earth tag, and the third has Black/Blue wires.
I feel sure it will be apparent once I start to put it all together, but it would be very helpful to know in advance exactly how and where to place the loom on the frame, and what the wires should connect to. I think it might be difficult to move the loom once the engine has been fitted to the frame.
My scooter was never fitted with a battery, so I believe at least one of the red wires is not required. (Casa Part No: 104 for non-battery was not available when I bought my loom)
(Thanks John Collier for directing me to your photos on an earlier post.)