LCGB Forums

The ability to post messages is restricted to LCGB members. Any questions contact us at lcgbadmin@googlemail.com

Woodruff key

Technical help for all early models, A, B, C, LC, D, LD, E & F models

Woodruff key

Postby oggie » Mon May 17, 2021 6:07 pm

Hi does anyone know where I can get a woodruff key for the flywheel on a model e/f . just Sheard it off :oops: it's not the normal size it's about half the normal size
oggie
 
Posts: 23
Joined: Wed Jul 02, 2014 3:41 pm

Re: Woodruff key

Postby missing lynx » Mon May 17, 2021 7:39 pm

Could it be the same size as the vespa flywheel one?
missing lynx
 
Posts: 863
Joined: Wed Nov 26, 2014 5:14 pm

Re: Woodruff key

Postby oggie » Mon May 17, 2021 8:06 pm

I think the lambretta and vespa are the same size this is really quite small its about half the size. If I can't get one i may have to try and file one down.
oggie
 
Posts: 23
Joined: Wed Jul 02, 2014 3:41 pm

Re: Woodruff key

Postby missing lynx » Mon May 17, 2021 9:26 pm

It may be the clutch one but the vespa has one the same size as a lammy and the other one is about half the size
missing lynx
 
Posts: 863
Joined: Wed Nov 26, 2014 5:14 pm

Re: Woodruff key

Postby coaster » Tue May 18, 2021 12:33 am

They are available in standard sizes on ebay, from about 1.5mm width upwards and each with comes in at least 2 length and depth options. I'm in the process of buying one for a Spanish 50cc trials bike atm. I too was hoping a lamy one would it but even the Vega one is too wide....The lamy flywheel puller fitted though 8-)
Last edited by coaster on Tue May 18, 2021 8:59 am, edited 2 times in total.
User avatar
coaster
 
Posts: 2647
Joined: Fri May 30, 2014 1:00 pm
Location: Norfolk, Flying 8 Balls

Re: Woodruff key

Postby oggie » Tue May 18, 2021 8:43 am

Thanks for the info I will try and measure what's left and buy a few
oggie
 
Posts: 23
Joined: Wed Jul 02, 2014 3:41 pm


Return to Pre 57

Who is online

Users browsing this forum: No registered users and 4 guests