Technical help for all early models, A, B, C, LC, D, LD, E & F models
by oggie » Mon May 17, 2021 6:07 pm
Hi does anyone know where I can get a woodruff key for the flywheel on a model e/f . just Sheard it off
it's not the normal size it's about half the normal size
-
oggie
-
- Posts: 23
- Joined: Wed Jul 02, 2014 3:41 pm
by missing lynx » Mon May 17, 2021 7:39 pm
Could it be the same size as the vespa flywheel one?
-
missing lynx
-
- Posts: 867
- Joined: Wed Nov 26, 2014 5:14 pm
by oggie » Mon May 17, 2021 8:06 pm
I think the lambretta and vespa are the same size this is really quite small its about half the size. If I can't get one i may have to try and file one down.
-
oggie
-
- Posts: 23
- Joined: Wed Jul 02, 2014 3:41 pm
by missing lynx » Mon May 17, 2021 9:26 pm
It may be the clutch one but the vespa has one the same size as a lammy and the other one is about half the size
-
missing lynx
-
- Posts: 867
- Joined: Wed Nov 26, 2014 5:14 pm
by coaster » Tue May 18, 2021 12:33 am
They are available in standard sizes on ebay, from about 1.5mm width upwards and each with comes in at least 2 length and depth options. I'm in the process of buying one for a Spanish 50cc trials bike atm. I too was hoping a lamy one would it but even the Vega one is too wide....The lamy flywheel puller fitted though
Last edited by
coaster on Tue May 18, 2021 8:59 am, edited 2 times in total.
-
coaster
-
- Posts: 2647
- Joined: Fri May 30, 2014 1:00 pm
- Location: Norfolk, Flying 8 Balls
by oggie » Tue May 18, 2021 8:43 am
Thanks for the info I will try and measure what's left and buy a few
-
oggie
-
- Posts: 23
- Joined: Wed Jul 02, 2014 3:41 pm
Return to Pre 57
Who is online
Users browsing this forum: No registered users and 3 guests