Hi, looking for some help before I pull my remaining hair out!
I’ve just fitted a varitronic (no battery)during the rebuild and this is the current status:
1. Switch cleaned and appears to operate correctly without the engine running and no connections to bulb holders etc.
2. All wires from the switch have continuity and switch as they should as the various positions are selected.
3. In position 0 the horn and brake light works
4. In position 1 the horn, brake light and side light (yellow) works (no rear light)
5. In position 2 and 3 nothing?
I have a multimeter and ambition that is the extent of my electrical ability, any help or suggestions much appreciated.