LCGB Forums

The ability to post messages is restricted to LCGB members. Any questions contact us at lcgbadmin@googlemail.com

Arrives tomorrow.....

LAMBRETTA ONLY PLEASE
Show your Lambretta off to us all with pictures of your pride and joy.

Arrives tomorrow.....

Postby lammydave » Thu Jul 26, 2018 6:09 am

User avatar
lammydave
 
Posts: 232
Joined: Sat May 31, 2014 6:09 am
Location: in the shed

Re: Arrives tomorrow.....

Postby shane BBoys » Thu Jul 26, 2018 6:26 am

that looks to be in great condition, any plans?

:mrgreen:

Shane.
User avatar
shane BBoys
 
Posts: 479
Joined: Sat Sep 06, 2014 5:46 pm
Location: Bradford

Re: Arrives tomorrow.....

Postby lammydave » Thu Jul 26, 2018 4:19 pm

shane BBoys wrote:that looks to be in great condition, any plans?

:mrgreen:

Shane.


leave body as is...

RT195

30mm delly

Scootopia Ancillotti

new crank

electronic ignition with tambs stator and cdi
User avatar
lammydave
 
Posts: 232
Joined: Sat May 31, 2014 6:09 am
Location: in the shed

Re: Arrives tomorrow.....

Postby ToBoldlyGo » Thu Jul 26, 2018 6:05 pm

Nooooo.......... You don't want a 30mm carb.
ToBoldlyGo
 
Posts: 748
Joined: Thu Jul 02, 2015 7:34 pm

Re: Arrives tomorrow.....

Postby TurboTrev » Thu Jul 26, 2018 6:17 pm

Nice, not many very late SX150s about. 8-) Is it an import or UK from new?
TurboTrev
 
Posts: 149
Joined: Fri May 30, 2014 6:48 pm

Re: Arrives tomorrow.....

Postby Scooterslag » Thu Jul 26, 2018 6:56 pm

very nice late SX150 with the clip on panels and plastic butty box - good find fella , nice to see you keeping it as is 8-)
User avatar
Scooterslag
 
Posts: 398
Joined: Sun Jun 01, 2014 4:29 am

Re: Arrives tomorrow.....

Postby citydaz » Thu Jul 26, 2018 11:10 pm

just add MB developments front dampers
User avatar
citydaz
 
Posts: 658
Joined: Tue Dec 23, 2014 11:35 pm

Re: Arrives tomorrow.....

Postby Ranburetta » Thu Jul 26, 2018 11:42 pm

Marco has some nice scooters.
Ranburetta
 
Posts: 386
Joined: Thu Jan 21, 2016 9:28 pm

Re: Arrives tomorrow.....

Postby pacemaker » Fri Jul 27, 2018 9:36 pm

very nice Dave
User avatar
pacemaker
 
Posts: 147
Joined: Thu Jun 05, 2014 1:51 pm

Re: Arrives tomorrow.....

Postby lammydave » Fri Jul 27, 2018 11:26 pm

to answer questions... it's an import bought from Marco at Scooter Emporium... a true gent and a good price for the scooter...

I don't have too much free time, so I'll get Rob Skipsey to do the reg for me

I'll be fitting front dampers, with billet brackets from lth...

At the moment it has a great spark on the existing points system, but I will be fitting a new crank with the rt kit ... can I still keep the points set up as the taper on the flywheel is different, so will need a new one??...

Keeping the front hub as is, (no disc brake atm) as long as I can get it working well... on a lambretta?? ...May be a tough job

when I fit the RT kit, i'll also fit all new bearings and seals as well as a new clutch
User avatar
lammydave
 
Posts: 232
Joined: Sat May 31, 2014 6:09 am
Location: in the shed

Re: Arrives tomorrow.....

Postby Warkton Tornado No.1 » Sat Jul 28, 2018 9:40 am

The stator may need the bore to be opened up, but should otherwise work with a GP crankshaft.

The most reliable scooter I ever owned was an unmolested GP 150 that I added 200 forks & a disc brake to along with a modified exhaust that we used to call 'straight through' though the tailpipe diameter was marginally increased.

You could do worse than try something similar for a while, as I would think it very likely that the similar barrel, preferably a 22 mm Dell'Orto & an unrestricted exhaust should comfortably enable a genuine 70 mph to be achieved just by allowing it to rev on. From what I read on here, many spend a fortune & hardly achieve that...

IMHO, tuning begins with optimising what you have.

Money saved can then often be spent on a better front end set up & a 12 volt (points!) conversion to better see where you are going @ the higher rate of knots..... ;)
Warkton Tornado No.1
 
Posts: 2112
Joined: Sun Jan 11, 2015 1:27 pm

Re: Arrives tomorrow.....

Postby Cosmic Wizard » Fri Aug 24, 2018 8:17 pm

That's a nice looking scooter & I like the sound of your upgrades (I love engine builds), so I'll be watching with interest ;) 8-)

I've now bought 3 scooters from Marco & Steve, they're top geezers :D My latest purchase will be with me in the next few weeks, but renovation will have to wait as I'm recovering with a broken ankle after being knocked off my 750 :cry:

Good luck & make sure you post plenty of pics.
Cheers
Jim
User avatar
Cosmic Wizard
 
Posts: 49
Joined: Fri Aug 18, 2017 5:36 am
Location: London

Re: Arrives tomorrow.....

Postby lammydave » Sat Aug 25, 2018 6:24 am

so, The 195 kit is on... carb needs fine tuning....

there was fun on the way...(it's a lambretta)

rear brake shoes were welded to the post... this kinda thing was going to rear it's head more than once... I think the scooter must have been sat somewhere for ages..

Anyway, persuaded those off, new posts, shoes clips etc, works a treat now...

Same with front hub, shoes were solid.... spend ages with easing spray, eventually came off.... new shoes etc, now good to go....

Engine back in and fired up....

Only ignition circuit working, no other electrics,... think all the solder joints had completely dried out so ignition switch and horn/dip switch were useless...

taken them off, replaced with scootopia ones, perfect fit and everything works now.. just the brake light switch to fit as the old one is completely shot

I was particularly gutted at the ignition switch as it's got its original key... so will see if Jem Booth can recommision for me...

body work polished up a treat and all the panels are in great nick... just a big gouge in the headset, so will take the opportunity to take it back to original white colour

putting all the cables in next

got a pair of tyres and tubes from Martin Corrado, so will take the old rims off the existing very old tyres, restore the original Innocenti rims and job's a good un

Rob Skipsey is on the case with the registration process, so hopefully not too log before she's on the road!
User avatar
lammydave
 
Posts: 232
Joined: Sat May 31, 2014 6:09 am
Location: in the shed

Re: Arrives tomorrow.....

Postby ToBoldlyGo » Sat Aug 25, 2018 12:01 pm

Got one of these you can have if you're interested Dave?

https://www.scootopia.com/electrical/54 ... ion-switch

Image
ToBoldlyGo
 
Posts: 748
Joined: Thu Jul 02, 2015 7:34 pm

Re: Arrives tomorrow.....

Postby lammydave » Sat Sep 15, 2018 6:53 am

ToBoldlyGo wrote:Got one of these you can have if you're interested Dave?

https://www.scootopia.com/electrical/54 ... ion-switch

Image



bugger, only just seen this...
:-(
User avatar
lammydave
 
Posts: 232
Joined: Sat May 31, 2014 6:09 am
Location: in the shed

Re: Arrives tomorrow.....

Postby corrado » Fri Sep 21, 2018 9:20 pm

lammydave wrote:
I'll be fitting front dampers, with billet brackets from lth...


What about the bottom fitting? Shocky should have links to suit with welded studs. I've got BGM top mounts if you've not already got LTH ones.
User avatar
corrado
 
Posts: 610
Joined: Sun Jun 01, 2014 1:49 am
Location: Blackpool

Re: Arrives tomorrow.....

Postby HxPaul » Wed Oct 10, 2018 7:13 pm

I have one from Marco,it has a duel seat now instead of the single seats,apart from this it is the exact same scooter. https://mail.yahoo.com/d/search/referre ... llscreen=1
User avatar
HxPaul
 
Posts: 1583
Joined: Fri May 30, 2014 9:18 am
Location: Halifax


Return to Show Your Ride

Who is online

Users browsing this forum: No registered users and 10 guests