Re: Series 3 TV 175
![Post Post](./styles/prosilver/imageset/icon_post_target.gif)
The ability to post messages is restricted to LCGB members. Any questions contact us at lcgbadmin@googlemail.com
http://www.ilambretta.co.uk/forum/
http://www.ilambretta.co.uk/forum/viewtopic.php?f=19&t=14044
Knowledge wrote:The only engine modification I did to my standard TV175 was to machine the head to give a sensible squish. I think mine was in excess of 2.5mm so I took it back down to about 1.3mm. I probably need to do a compression calculation before I run the machine as it may now be prone to overheating due to a higher compression.
Leave that one with me.