LCGB Forums

The ability to post messages is restricted to LCGB members. Any questions contact us at lcgbadmin@googlemail.com

Chain case studs...

Might be worth while looking in here first, as we post the most frequently asked questions within here!

Chain case studs...

Postby Andy B.L.C. » Fri Mar 30, 2018 12:33 am

Any recommendations...? (stepped/stopped (?),if still available, or not, & does it really matter?) Ta lots!
User avatar
Andy B.L.C.
 
Posts: 1499
Joined: Sat Aug 16, 2014 7:43 pm
Location: Gurt Brisol

Re: Chain case studs...

Postby Solid Air » Fri Mar 30, 2018 8:09 am

Wotcha Andy, I like these ones with the Allen key end and nyloc nuts...

Image

Darryl Taylor and another fella on eBay sell them.

Mark
User avatar
Solid Air
 
Posts: 979
Joined: Sun Jun 01, 2014 10:58 pm
Location: Cambridge

Re: Chain case studs...

Postby Scooterdude » Fri Mar 30, 2018 8:47 am

Solid Air wrote:Wotcha Andy, I like these ones with the Allen key end and nyloc nuts...

Image

Darryl Taylor and another fella on eBay sell them.

Mark

Yes i like these as well, does away with the need to use washers.
Scooterdude
 
Posts: 674
Joined: Fri May 26, 2017 3:45 am

Re: Chain case studs...

Postby Solid Air » Fri Mar 30, 2018 9:19 am

Scooterdude wrote:
Solid Air wrote:Wotcha Andy, I like these ones with the Allen key end and nyloc nuts...

Image

Darryl Taylor and another fella on eBay sell them.

Mark

Yes i like these as well, does away with the need to use washers.


Unless your side casing is painted ;)
User avatar
Solid Air
 
Posts: 979
Joined: Sun Jun 01, 2014 10:58 pm
Location: Cambridge

Re: Chain case studs...

Postby Andy B.L.C. » Fri Mar 30, 2018 9:11 pm

Nice1 Mark, proper like the look of them :) Don't do Farce book, which I believe to be DT's sales forum so shopping might be difficult... I'm sure I'll work summat out though ;)
User avatar
Andy B.L.C.
 
Posts: 1499
Joined: Sat Aug 16, 2014 7:43 pm
Location: Gurt Brisol

Re: Chain case studs...

Postby Andy B.L.C. » Fri Mar 30, 2018 9:51 pm

Sorted! :D Fanx again
User avatar
Andy B.L.C.
 
Posts: 1499
Joined: Sat Aug 16, 2014 7:43 pm
Location: Gurt Brisol

Re: Chain case studs...

Postby Solid Air » Fri Mar 30, 2018 10:08 pm

Good stuff, is this for your Euro engine?
User avatar
Solid Air
 
Posts: 979
Joined: Sun Jun 01, 2014 10:58 pm
Location: Cambridge

Re: Chain case studs...

Postby Andy B.L.C. » Fri Mar 30, 2018 10:27 pm

Kind of... but also for the German euro burfday present to self ped engine :roll:
User avatar
Andy B.L.C.
 
Posts: 1499
Joined: Sat Aug 16, 2014 7:43 pm
Location: Gurt Brisol


Return to Frequently Asked Questions

Who is online

Users browsing this forum: No registered users and 4 guests

cron