Carb trumpet on a 28 dellorto
Posted:
Mon Apr 22, 2019 1:29 pmby Topgearskin
Anyone fitted an old school trumpet onto a 28mm phbh delly?
I appreciate it's an old fashioned thing to do on a modern carb, but I don't want an air filter or an oily footboard. Running an RT smallblock kit and a BGM clubman.
Re: Carb trumpet on a 28 dellorto
Posted:
Tue Apr 23, 2019 9:16 amby Rich Oswald
I did on the J230 and loved it but having short legs I found I was covering it at every junction etc and it would cut out so changed to a foam filter,
Rich'
Re: Carb trumpet on a 28 dellorto
Posted:
Tue Apr 23, 2019 8:54 pmby Topgearskin
Thanks rich. Was that a screw on type or did you clamp on a generic trumpet?
Re: Carb trumpet on a 28 dellorto
Posted:
Wed Apr 24, 2019 9:25 amby Rich Oswald
Topgearskin wrote:Thanks rich. Was that a screw on type or did you clamp on a generic trumpet?
It was secured by grub screws.
Re: Carb trumpet on a 28 dellorto
Posted:
Fri Apr 26, 2019 6:54 amby Digger
Been running a screw on one with a gauze on a Rapido 225 for years.
Re: Carb trumpet on a 28 dellorto
Posted:
Fri Apr 26, 2019 4:34 pmby Topgearskin
Any link to where I could buy one chaps?
Re: Carb trumpet on a 28 dellorto
Posted:
Thu May 16, 2019 6:00 pmby Cgt75b
I run a trumpet on a 25 mil dellorto, I purchased it from like the comment says above eurocarb.
https://www.dellorto.co.uk/
Re: Carb trumpet on a 28 dellorto
Posted:
Fri May 17, 2019 12:24 amby rossclark
There is nowt modern about the PHBH...