LCGB Forums

The ability to post messages is restricted to LCGB members. Any questions contact us at lcgbadmin@googlemail.com

Throttle Cable Change

Want to know which carb to choose? Having problems setting up the jetting details on your scooter? Wheter you are using a standard or tuned carb, ask your question here.

Throttle Cable Change

Postby Granty » Mon May 06, 2019 10:32 pm

Changing my set up, swapping a standard jetex for a dellorto PHBH, on the traditional side - RHS looking at the bike. Do I need to change the throttle cable to an extra long one & then re-route as a matter of course? Cheers G
Granty
 
Posts: 254
Joined: Fri Jun 20, 2014 3:11 pm

Re: Throttle Cable Change

Postby Tractorman » Tue May 07, 2019 7:38 am

Not if you get a 90 degree bend, you will need a new inner because it's longer on the PHBH and the solder less nipple is at the headset end.
User avatar
Tractorman
 
Posts: 7777
Joined: Mon Jun 02, 2014 3:07 pm
Location: Lincoln

Re: Throttle Cable Change

Postby missing lynx » Tue May 07, 2019 7:37 pm

Also if you drill the throttle wheel so the cable can pass through the solderless nip and the throttle wheel it makes it much easier to fit the cable
missing lynx
 
Posts: 863
Joined: Wed Nov 26, 2014 5:14 pm


Return to Carburettors

Who is online

Users browsing this forum: No registered users and 3 guests