Page 1 of 1

Sh22/2 jetting

PostPosted: Mon Aug 26, 2019 4:52 pm
by Scooter Paul
Remind me please, carburation just over tickover , regulated by atomiser or slide? I have a slight hesitation but the rest of the Rev range is crisp and clean.

Re: Sh22/2 jetting

PostPosted: Mon Aug 26, 2019 11:42 pm
by Fast n Furious
Pilot jet then throttle slide. Throttle slide controls the mix up to about 1/4 throttle.
Check that you have the correct slide and pilot jet.
Check that the slide and carb housing are not worn.
Try a borrowed carb and see what difference that makes.

Re: Sh22/2 jetting

PostPosted: Tue Aug 27, 2019 9:37 am
by Scooter Paul
Fast n Furious wrote:Pilot jet then throttle slide. Throttle slide controls the mix up to about 1/4 throttle.
Check that you have the correct slide and pilot jet.
Check that the slide and carb housing are not worn.
Try a borrowed carb and see what difference that makes.

Thanks.