Page 1 of 1
Carb 1963 Li150 SH/18.
Posted:
Wed Feb 05, 2020 1:16 pmby mick996r
I have spent all winter rebuilding my bike. I am nearly finished just waiting for some more chrome parts to be finished. Anyway re-fitted the engine back in the frame and connected all back up. I have managed to get it going but it seems to be over fueling, with fuel spraying out of the air intake. I previously stripped and cleaned the carb, with new jets, float and float needle and new gaskets. I cannot even put the air hose on the carb as it just fills with fuel and drowns out the engine. I do not understand, does anybody out there have any ideas. Thanking you in advance for any assistance.
Re: Carb 1963 Li150 SH/18.
Posted:
Wed Feb 05, 2020 4:56 pmby ULC Soulagent
Piston round the right way ?
Re: Carb 1963 Li150 SH/18.
Posted:
Wed Feb 05, 2020 5:42 pmby missing lynx
I would strip the carb and make sure all the jets are present and correct and the slide isn't badly worn
Re: Carb 1963 Li150 SH/18.
Posted:
Wed Feb 05, 2020 6:47 pmby mick996r
Thank you for the reply's. Piston the wrong way round? Is over fueling a symptom of this? I have fitted a new piston (Mahle) but the marking on the crown was not very clear, I positioned the arrow (or what I thought was the arrow) as per the book (facing the exhaust port).
Re: Carb 1963 Li150 SH/18.
Posted:
Thu Mar 26, 2020 2:51 pmby hullygully
is the float sticking in the down position?
