LCGB Forums

The ability to post messages is restricted to LCGB members. Any questions contact us at lcgbadmin@googlemail.com

Jetting for 28mm phbh carb

Want to know which carb to choose? Having problems setting up the jetting details on your scooter? Wheter you are using a standard or tuned carb, ask your question here.

Jetting for 28mm phbh carb

Postby Rocketron13 » Sat May 16, 2020 5:20 pm

Good afternoon. Im after some info as to jetting a 28mm phbh carb which ive fitted to a rt195 kit. The kit has a reed valve conversion and running a 60x110 crank and no filter. Many thanks in advance
Rocketron13
 
Posts: 3
Joined: Fri Dec 20, 2019 6:00 pm

Re: Jetting for 28mm phbh carb

Postby shane BBoys » Sat May 16, 2020 6:09 pm

Does Broady not offer advice on his kits?
Cheers Shane.
User avatar
shane BBoys
 
Posts: 479
Joined: Sat Sep 06, 2014 5:46 pm
Location: Bradford

Re: Jetting for 28mm phbh carb

Postby ULC Soulagent » Sat May 16, 2020 7:56 pm

Here is one of my Rt195 piston ported setup with Bgm Mk1 clubman, don’t take it as gospel as no two setups are the same and since ur’s is reedvalved then then all jetting will be higher across the board
Pilot 48
Choke 70
Main 118
Needle X7 top clip
Atomiser AV264
Slide 50
Float 3.5g
Regards
Shane
User avatar
ULC Soulagent
 
Posts: 2137
Joined: Sun Apr 03, 2016 3:26 pm
Location: Milton Keynes


Return to Carburettors

Who is online

Users browsing this forum: No registered users and 3 guests