LCGB Forums

The ability to post messages is restricted to LCGB members. Any questions contact us at lcgbadmin@googlemail.com

Jetting for 30mm PHBH

Want to know which carb to choose? Having problems setting up the jetting details on your scooter? Wheter you are using a standard or tuned carb, ask your question here.

Jetting for 30mm PHBH

Postby Omega 7 » Thu Feb 11, 2021 8:25 am

Looking for a start in the jetting for a 30mm PHBH on a standard 200 engine, clubman exhaust with a foam filter
Omega 7
 
Posts: 28
Joined: Tue Jun 03, 2014 10:06 am

Re: Jetting for 30mm PHBH

Postby Storkfoot » Thu Feb 11, 2021 11:52 am

Hi, Trev. Hope you are all well.

This is the jetting on my GT186 back in 2012/13. I had a remote filter directly on the carb and an old Indian Clubman. This may be a place to start but consider coming down on the main and the pilot. I would suspect that the mid range would be fine.

Main 122,
atomiser AV264,
needle X13 2nd clip,
Slide 40,
Pilot 55,
Choke 70,
Needle Valve 300.
User avatar
Storkfoot
 
Posts: 2102
Joined: Fri May 30, 2014 8:59 pm
Location: Merseyside

Re: Jetting for 30mm PHBH

Postby Omega 7 » Thu Feb 11, 2021 2:27 pm

Thanks Paul, I'll give a it a go when I get home and the weather is a bit better, 30mm might be a bit big but it was lying around in the garage so I thought might as well use it. Hope all is well with you, did you get a ticket for Fort William
Omega 7
 
Posts: 28
Joined: Tue Jun 03, 2014 10:06 am

Re: Jetting for 30mm PHBH

Postby Leotech » Sat Feb 13, 2021 11:55 am

GP200, AF 42 big bore pipe foam filter.


Went well.

Main 115
Choke 50
Pilot 53
Atomiser AV266
Slide 40
Needle X2
Float valve 200
User avatar
Leotech
 
Posts: 246
Joined: Wed Jan 13, 2016 7:15 pm

Re: Jetting for 30mm PHBH

Postby Granty » Tue Apr 20, 2021 11:01 pm

Stage 4 200cc
30mm Delly - Open Mouthed
42mm AF Clubman
2 1/4 turns out
50 pilot
70 choke
40 slide
AV264 atomiser
X7 needle with clip top
123 main jet
Granty
 
Posts: 254
Joined: Fri Jun 20, 2014 3:11 pm


Return to Carburettors

Who is online

Users browsing this forum: No registered users and 2 guests