Has anybody here had any success using an original Dellorto SH2/24 on a standard 200cc Lambretta? I'd be interested to know which jetting/slide you're using, and which Inlet manifold can be used.
I'm sure I've seen it on a Rimini restored SX200 a few years back, so it must be possible.
I have done a brief search on here must it only really covers the SH2/22.
Anybody?
LCGB Forums
The ability to post messages is restricted to LCGB members. Any questions contact us at lcgbadmin@googlemail.com
Dellorto SH2/24
3 posts
• Page 1 of 1
Dellorto SH2/24
by asjll1973 » Mon May 17, 2021 1:30 pm
- asjll1973
- Posts: 55
- Joined: Fri Jun 07, 2019 10:12 am
Re: Dellorto SH2/24
by martyn dwane » Mon May 17, 2021 9:42 pm
https://motorcycletrader.net/JETEX-SH2- ... 656119.cms
might help. Readspeed also do a copy.
might help. Readspeed also do a copy.
- martyn dwane
- Posts: 372
- Joined: Tue Jun 03, 2014 10:06 pm
Re: Dellorto SH2/24
by hullygully » Wed May 19, 2021 11:12 am
should be the same as boring the jetex or SH2/22 out to 24/25mm,
bore out the 200 manifold to suit
GP200 slide & jets, main should be between 125 & 130 (exhaust & tune dependant),
mabes up the pilot?
mabes drill out the atomisor?
defo sort airbox out & change to breathe sweet filter.
bore out the 200 manifold to suit
GP200 slide & jets, main should be between 125 & 130 (exhaust & tune dependant),
mabes up the pilot?
mabes drill out the atomisor?
defo sort airbox out & change to breathe sweet filter.
- hullygully
- Posts: 1983
- Joined: Thu Jun 05, 2014 1:28 pm
- Location: Hull
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 4 guests