LCGB Forums

Hi all, mates just fitted a185 scootopia kit with 28 mm carb, he’s go clearance issues with carb close to panel(can’t fit any filter etc) any ideas, cheers liam

Either try a Chiselspeed panel filter or run it open mouthed.

Cheers for that, he is running open at moment but doesn’t like it, will have a look at those, cheers bud

The Casa filter is good and fits well under the panel.

Smaller carb rubber? bringing the carb closer to manifold?
I've also used a shorter manifold, can't remember where from? either Broady or Beedys
it all adds up bud

These flange manifolds were made specifically for the Casa 185 to pull the carb closer to the engine and away from the panel, so they should be ideal for the Scootopia 185.

As an alternative, I've also adapted the BGM RT195/225 flange manifolds to fit small block inlet spacing. MB also makes a cast version, as opposed the BGM which is CNC.

Sorry for late reply, manifold from mb & all good, cheers boys

Slightly off topic,but how does it run with the 28 carb.....looking to run similar with a 26...what exhaust is he running?

Runs great with a 42 clubman

THANKS.....WHATS PERFORMANCE LIKE