Page 1 of 1

Jet reamer set

PostPosted: Tue Sep 28, 2021 10:35 pm
by Warkton Tornado No.1
I want to refurbish an old Keihin PWK 38 but they do not have removeable atomisers. They have a metering block in which the pilot & main jets are fastened, but the atomiser, or needle jet, is integral, unlike the smaller sizes.

I reckon I can adapt an atomiser from either a smaller PWK or even something from another manufacturer. The smaller PWK will need an extension making & then press fitted in.

The issue will be getting the sized hole aligned & I'd sooner not use a drill then needle file, so can anybody recommend a set of jet reamers?

The size I'm aiming for is 2.9 mm, but that's not certain.

Thank you in anticipation :D

Re: Jet reamer set

PostPosted: Sun Oct 24, 2021 4:39 am
by roli150lam
pedparts.co.uk
jet reamers&jet guages
+many carbs& carb spares

may have what you want