Gori 50 & Dellorto 30

[DaveTomo]

Right I'll start the ball rolling.... Anyone running a Gori 50 box pipe? After a starting point on a 225,previously run a 48 mm clubman & the carb was Dellorto 30 PHBH open mouth hole in the panel,tea strainer filter
atomiser/needle jet AV266
main jet 122
float jet 300
X7 needle second clip
40 slide
55 pilot
choke 70
mixture screw 3 turns out.
BGM stator set at 17 BTDC static
Now I thought (foolishly) it wouldn't be much different,but bogs quite dramatically around 1/2 throttle upwards so I'm presuming it makes its power totally different to the clubman.Anyone running this combo be able to give me an idea of there set up please?

[Rich Oswald]

Not running a Gori Dave but have the same set up on 225 Mugello with Taff Mk 4. Have you tried top clip as moving up a clip worked for me when mine was boggy mid range.

Rich'

[DaveTomo]

Cheers Rich, I'll give that a go tomorrow & let you know how I get on

[DaveTomo]

Cheers Rich,moved up 1 clip , sorted done a few plug chops & choke test, all good.Must admit I was a bit wary of going onto the top clip ,but the engine seems happy,so thank you mate

[Rich Oswald]

No worries Dave, just keep an eye on plug colour at mid range that's all.

Rich'