LCGB Forums

The ability to post messages is restricted to LCGB members. Any questions contact us at lcgbadmin@googlemail.com

TM24 on an avanti 230

Want to know which carb to choose? Having problems setting up the jetting details on your scooter? Wheter you are using a standard or tuned carb, ask your question here.

TM24 on an avanti 230

Postby ScooterLoopyJohn » Thu Jul 13, 2017 12:18 am

Hi after some trying i now have the set up i was after. avanti 230 , atomic reed inlet, Mikuni TM24 thr a spanish air box, ancolotti exhaust, agusto 6000 (23degs static going to 18 degs at 5000 rpm) asisted standard electronic ignition. carb settings are needle 5N13 second clip, 22.5 pilot,210 main . Showed 16.5 bhp at 6750 rpm and 13.34 ft/lbs of torque at 5300 rpm. pulls 4.58 top gear with me on it and its in the heavy long wheel base special. 56 mpg very happy. :o :o
Last edited by ScooterLoopyJohn on Thu Oct 26, 2017 12:44 am, edited 1 time in total.
ScooterLoopyJohn
 
Posts: 8
Joined: Sat Jul 05, 2014 7:08 pm

Re: TM24 on an avanti 230

Postby martyn dwane » Thu Jul 13, 2017 11:35 am

Sounds a nice ride,
what atomiser did you end up on ?
martyn dwane
 
Posts: 371
Joined: Tue Jun 03, 2014 10:06 pm

Re: TM24 on an avanti 230

Postby ScooterLoopyJohn » Thu Jul 13, 2017 12:34 pm

The one that came with the carb, a Q-0 i think, yes it is nice to ride bit like a GP200 on steroids :o :o :o :o :o
ScooterLoopyJohn
 
Posts: 8
Joined: Sat Jul 05, 2014 7:08 pm


Return to Carburettors

Who is online

Users browsing this forum: No registered users and 3 guests