LCGB Forums
The ability to post messages is restricted to LCGB members. Any questions contact us at lcgbadmin@googlemail.com
Phbh float
3 posts
• Page 1 of 1
Phbh float
by gp200ts1 » Thu Oct 11, 2018 6:26 pm
I have a few spare phbh floats, they are all 11 gram. What would happen if I fitted one instead of the 6 gram one?
- gp200ts1
- Posts: 256
- Joined: Fri May 30, 2014 2:43 pm
Re: Phbh float
by Angry Bloke » Thu Oct 11, 2018 10:10 pm
I used one in mine and it definitely ran boggy.
Also was difficult to start when warm !
Also was difficult to start when warm !
-
Angry Bloke - Posts: 274
- Joined: Sat May 31, 2014 11:03 am
- Location: Flying 8 Balls - Norwich
Re: Phbh float
by Warkton Tornado No.1 » Fri Oct 12, 2018 12:14 pm
In all carburettors where there is a choice of floats, (not just the PH range that are really better suited to a four stroke but modified to suit two stroke 
) the float weight should be heavier to allow a higher fuel level to suit the characteristics of the two stroke.
Stick with what you have (if you must run the PH range) would be my advice
) the float weight should be heavier to allow a higher fuel level to suit the characteristics of the two stroke.Stick with what you have (if you must run the PH range) would be my advice
- Warkton Tornado No.1
- Posts: 2116
- Joined: Sun Jan 11, 2015 1:27 pm
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 6 guests