LCGB Forums

The ability to post messages is restricted to LCGB members. Any questions contact us at lcgbadmin@googlemail.com

7 stud mugello head

Need help with a tuning kit, how do you tune your scooter, which kit should I choose, and all general tuning and modifcations questions are for in here.

7 stud mugello head

Postby Martin s » Sat Nov 24, 2018 8:28 pm

I've got a large block mugello cylinder which is 4 stud, the head is 7 stud. Can this be used or would
it be like a colander?
Martin s
 
Posts: 76
Joined: Fri Jun 27, 2014 1:30 pm

Re: 7 stud mugello head

Postby Knowledge » Sat Nov 24, 2018 9:24 pm

I’d say it could be used.

I assume that when you place the 7 hole head on top of the cylinder, you can’t see into the barrel through the vacant 3 holes....
User avatar
Knowledge
 
Posts: 1953
Joined: Sat May 31, 2014 11:42 am
Location: Ipswich

Re: 7 stud mugello head

Postby Martin s » Sat Nov 24, 2018 9:54 pm

I can see quite a bit of the gasket face through the 3 surplus holes is what's bothering me. I got it like this.
https://imgur.com/5XSCrvp
https://imgur.com/zSxb5TF
https://imgur.com/L1pmHYy
https://imgur.com/UPO4Abw
Martin s
 
Posts: 76
Joined: Fri Jun 27, 2014 1:30 pm

Re: 7 stud mugello head

Postby Knowledge » Sun Nov 25, 2018 9:42 pm

OK, that is pretty much what I was expecting to see. As long as there is a continuous band of ali head gasket around the top of the barrel (which there will be), then you should be fine.
User avatar
Knowledge
 
Posts: 1953
Joined: Sat May 31, 2014 11:42 am
Location: Ipswich

Re: 7 stud mugello head

Postby Martin s » Mon Nov 26, 2018 7:47 pm

Thanks Martin.
Martin s
 
Posts: 76
Joined: Fri Jun 27, 2014 1:30 pm


Return to Tuning & Kits

Who is online

Users browsing this forum: No registered users and 11 guests