Page 1 of 1
Box pipe and TS1
Posted:
Tue Aug 06, 2019 1:48 pmby TVSi
Hi chaps
i'm looking for some guidance on suitable gearbox ratio for a new BGM box pipe on a TS1 230, i'm fitting one for a friend and though i'm pretty good with TS1 expansion pipes / gearbox combos i have to say i have no experience with the latest BGM pipe, was thinking maybe 4.9 final drive to start with on a Indian GP200 box 19 x 47? Am I off the mark with this? any help is greatly appreciated, thanks
Re: Box pipe and TS1
Posted:
Tue Aug 06, 2019 7:35 pmby al pushpak
That's a good enough starting point as any, it may even pull 19x46= 4:84. I run 4:95 on my ts1 with a Ron Moss clubman & it seems pretty spot on to me
good luck
Re: Box pipe and TS1
Posted:
Tue Aug 06, 2019 8:31 pmby dickie
al pushpak wrote:That's a good enough starting point as any, it may even pull 19x46= 4:84. I run 4:95 on my ts1 with a Ron Moss clubman & it seems pretty spot on to me
good luck
I'm running 4.7 on my TS1 with Ron moss clubman and it suits me. Don't think I'd want to go any lower though.
Re: Box pipe and TS1
Posted:
Wed Aug 07, 2019 6:57 amby TVSi
Thanks for the guidance
, i think i'll also mention the Ron Moss pipe to him as it may be more suitable for a TS1 than his choice of BGM V4, thanks guys
Re: Box pipe and TS1
Posted:
Wed Aug 07, 2019 7:29 amby al pushpak
yes definitely ,the Ron Moss clubman is worth considering in my opinion
the only reason I run 4:95 4th on my scoot is that its a series 1 & not as aerodynamic as a series 3 ! & seems to suit it with this set up
good luck.
Re: Box pipe and TS1
Posted:
Wed Aug 07, 2019 2:27 pmby ULC Soulagent
My Bgm Rt 200 reedvalve pulls sx 200 box 4.8 with Bgm clubman V4 with ease
Re: Box pipe and TS1
Posted:
Wed Aug 07, 2019 11:01 pmby Simon ELC
I have a TS1 253 with a Ron Moss Clubman and it pulls 4.55 with an AF 5 speed easily. I’m 12 stone.
Re: Box pipe and TS1
Posted:
Thu Aug 08, 2019 9:10 amby bike grim
My CST3 fell apart on the Euro so I’ve temporarily fitted my previously modified Gori (larger diameter tailpipe) on my TS1230 (DSC lined and tuned) running it with the same jetting with a 30mm PHBH and an MB5 box with 4.3 final drive (19/46). It’s revs right through and will pull to 7500rpm in 4th but it just tails off a bit in top and will only rev to 6500 so just over 70mph, I reckon it would pull through with 4.45 (19/47) and rev on similar to the CST but without the kick of the expansion.
Re: Box pipe and TS1
Posted:
Thu Aug 08, 2019 11:04 amby Solid Air
Simon ELC wrote:I’m 12 stone.
Show off!
Re: Box pipe and TS1
Posted:
Fri Aug 09, 2019 8:53 pmby ROClarke
My TS1 with a BGM V4 box and 16/46 will do 76 mph
You are over geared.
Re: Box pipe and TS1
Posted:
Wed Aug 21, 2019 10:28 amby Simon ELC
Solid Air wrote:Simon ELC wrote:I’m 12 stone.
Show off!
Twelve and a half now. Just returned from a 12 Day Cruise. (Or eating and drinking holiday)
