Page 1 of 1

Which Clubman have I got.

PostPosted: Fri Feb 14, 2020 6:06 pm
by St George
Came with a project I bought last year, looks to be 42mm, it has a rod welded from the back of the silencer to the tail pipe. Otherwise looks like any other clubman with no markings on it. U Pipe, one piece normal fitting. Thanks

Re: Which Clubman have I got.

PostPosted: Fri Feb 14, 2020 9:58 pm
by ToBoldlyGo
Not much to go on. Could be a Sito Ancillotti perhaps.

Re: Which Clubman have I got.

PostPosted: Sat Feb 15, 2020 10:09 am
by HxPaul
If it has a two piece downpipe it could be a scootopia copy of an Ancilotti.

Re: Which Clubman have I got.

PostPosted: Sat Feb 15, 2020 4:01 pm
by St George
One piece pipe. Internal of pipe 35 mm, external 40 mm. Can't post pictures sorry.

Re: Which Clubman have I got.

PostPosted: Sat Feb 15, 2020 4:17 pm
by Toddy
St George wrote:One piece pipe. Internal of pipe 35 mm, external 40 mm. Can't post pictures sorry.


If you want to e mail pics to me I can post for you paul.todd2@yahoo.co.uk

Re: Which Clubman have I got.

PostPosted: Sat Feb 15, 2020 8:26 pm
by vegansydney
As noted above due the strengthening bracket it could be anything from a Sito Ancilottii (TS/Evergreen), an RS Clubman or a even a homemade addition to another Clubman. Please post some photos.

Re: Which Clubman have I got.

PostPosted: Sat Feb 15, 2020 11:33 pm
by ToBoldlyGo
If you are the one that posted on FB I can tell you that it looks like an Indian big bore exhaust.

Re: Which Clubman have I got.

PostPosted: Sun Feb 16, 2020 4:11 pm
by St George
Pics sent to Toddy so everyone can see. Thanks for replies.

Re: Which Clubman have I got.

PostPosted: Sun Feb 16, 2020 8:59 pm
by Toddy
There you go buddy



Image

Image

Image

Image

Image

Re: Which Clubman have I got.

PostPosted: Mon Feb 17, 2020 9:06 pm
by ToBoldlyGo
Indian big bore. Rough as a bears arse.

Re: Which Clubman have I got.

PostPosted: Tue Feb 18, 2020 8:24 am
by al pushpak
"Indian big bore. Rough as a bears arse" But perform a lot better than most of the more expensive club mans available out there ! :D ;)

Re: Which Clubman have I got.

PostPosted: Tue Feb 18, 2020 10:11 am
by St George
Thanks lads, it does sound nice. Job done.

Re: Which Clubman have I got.

PostPosted: Wed Feb 19, 2020 4:22 am
by vegansydney
If you plan on fitting it, I'd spend 10 minutes blending the U-bend where it mounts on the exhaust port with a Dremmel (or similar tool). This will aid the flow of exhaust gases.

I'm surprised you can't see sunlight through it :lol: That said, it looks no better than all the Casa U-bends (S3/GP/dl) I've seen :shock:

Image

Re: Which Clubman have I got.

PostPosted: Wed Feb 19, 2020 5:52 pm
by St George
Thanks, the other side of the flange is nicely welded. Can fill the gaps with exhaust putty. Cheers.