LCGB Forums

The ability to post messages is restricted to LCGB members. Any questions contact us at lcgbadmin@googlemail.com

New one on me

Need help with a tuning kit, how do you tune your scooter, which kit should I choose, and all general tuning and modifcations questions are for in here.

New one on me

Postby Scooterlam » Sat Sep 04, 2021 6:34 pm

Real odd ball one
After the French euro I had to swap cards due to the slid key coming loose. Changed all the from old carb into different body.
It did the Spanish euro fine till the 5speed died.
Done lots of bit's and bobs since.
Today I'm going through the bike and thought I'd play with the aircrew setting as it drowns with a filter.
The aircrew is up against the engine mount so not easy to get at
Giving it some thought I'm pretty sure there's never been an aircrew in there.
Pick up has always been clean and only thing I've noticed is a slight rise in egt temps on the gamma at wot.
Question is what changes should I expect when I replace the missing part.
Scooterlam
 
Posts: 1377
Joined: Mon Jun 09, 2014 10:59 pm

Re: New one on me

Postby ULC Soulagent » Mon Sep 06, 2021 10:14 am

What’s a Slid key ?
User avatar
ULC Soulagent
 
Posts: 2137
Joined: Sun Apr 03, 2016 3:26 pm
Location: Milton Keynes

Re: New one on me

Postby duncan1958 » Mon Sep 06, 2021 12:30 pm

ULC Soulagent wrote:What’s a Slid key ?

I am going to have a guess at the pin which stops / guides the slide in the carb body
duncan1958
 
Posts: 136
Joined: Sun Jun 01, 2014 5:14 pm

Re: New one on me

Postby Scooterlam » Sun Sep 12, 2021 3:13 am

duncan1958 wrote:
ULC Soulagent wrote:What’s a Slid key ?

I am going to have a guess at the pin which stops / guides the slide in the carb body

Yep, I never knew it was a thing until it came loose,
With no engineering background I figured as a groove is a keyway the bit that fits into in must be a key.
I'm sure there's a technical term for it but it works for me.
Scooterlam
 
Posts: 1377
Joined: Mon Jun 09, 2014 10:59 pm


Return to Tuning & Kits

Who is online

Users browsing this forum: No registered users and 8 guests

cron