Page 1 of 1
RT gearing
Posted:
Wed Nov 24, 2021 11:47 amby Toddy
Just in the process of building one for a mate , solo rider , 30mm dellorto and clubman looking at a good touring set up,what are people running in theirs ? Cheers
Re: RT gearing
Posted:
Wed Nov 24, 2021 12:07 pmby Rich Oswald
Toddy wrote:Just in the process of building one for a mate , solo rider , 30mm dellorto and clubman looking at a good touring set up,what are people running in theirs ? Cheers
Indian GP200 box, 19/46 in my RT230 reed, but you'll know that!
Re: RT gearing
Posted:
Wed Nov 24, 2021 12:12 pmby Toddy
Toddy wrote:Just in the process of building one for a mate , solo rider , 30mm dellorto and clubman looking at a good touring set up,what are people running in theirs ? Cheers
Sorry small block RT 195
Re: RT gearing
Posted:
Wed Nov 24, 2021 12:29 pmby Rich Oswald
Toddy wrote:Toddy wrote:Just in the process of building one for a mate , solo rider , 30mm dellorto and clubman looking at a good touring set up,what are people running in theirs ? Cheers
Sorry small block RT 195
Ah ok!
Re: RT gearing
Posted:
Wed Nov 24, 2021 12:44 pmby Rich Oswald
Just done a search on the RT Facebook group and most are running LI150 Box with 16/46. One running 17/46 but I reckon that might struggle on hills or headwind.
Rich'
Re: RT gearing
Posted:
Wed Nov 24, 2021 1:36 pmby nsaints
Mine is running an Li150 16/46, & went around the last Derby 150 fine. This is despite others telling me the gearing is wrong for my configuration.
RT195, MB version 4, 25mm PHBL, modified standard airbox
Edit. Corrected the typo front sprocket size to 16.
Didn’t enjoy 4.89 on the Kendal rally. Hills must be steeper ?
Somewhere near 5 would be better
I’ll change my gearing after the NRR this weekend.
Re: RT gearing
Posted:
Wed Nov 24, 2021 1:43 pmby Mike-Allen
My series 2 RT195 with 30phbh, 60x110 crank & V4 BGM runs the AF5 gearbox 35 tooth version 18/47
Re: RT gearing
Posted:
Wed Nov 24, 2021 5:45 pmby Meds
I’m more a fuller figured gentleman and run it at 4.95 on a pacemaker box.
Great all rounder - it’s my go to scoot for the twisties and hills.
BGM clubman and 30 delly - non Reed
Re: RT gearing
Posted:
Thu Nov 25, 2021 7:53 pmby ULC Soulagent
On my S2 Rt195 piston port, 28 delly, bgm mk1 , li 150 box 16/46
On the special Rt 195 reedvavle, 25 delly, bgm mk4, sx200 box 15/46
Both decent setup with only very steep hills and headwinds killing top end
Re: RT gearing
Posted:
Thu Nov 25, 2021 9:40 pmby Toddy
Thanks gents
Re: RT gearing
Posted:
Fri Nov 26, 2021 6:39 pmby lozmondo
piston port, 60x110 crank,30mm, BGM v3
LI125 17x46 (5.01 final drive ) pulls lovely tops out above legal speed limit according to GPS
Great all round motor
Re: RT gearing
Posted:
Fri Nov 26, 2021 11:23 pmby Nigel. S
LI150 15/46, 30mm, v4 box. 60/110
Had 16/46 with a scootopia box and didn't like it.
Intend to put the 16 back on now it has the v4.
Still good as it is though.