Taffspeed stainless steel u- pipe
Posted: Sun Feb 18, 2024 1:09 pmI seen these someone had made these recently.
Anyone know who had made them ?
Cheers, Will
Anyone know who had made them ?
Cheers, Will
LCGB Forums
The ability to post messages is restricted to LCGB members. Any questions contact us at lcgbadmin@googlemail.com
http://www.ilambretta.co.uk/forum/
Taffspeed stainless steel u- pipe
Page 1 of 1
Posted: Sun Feb 18, 2024 1:09 pmRe: Taffspeed stainless steel u- pipe
Posted: Sun Feb 18, 2024 1:31 pmI would have one them!
Re: Taffspeed stainless steel u- pipe
Posted: Mon Apr 15, 2024 10:55 amJust wanted to resurrect this thread in case anyone had an update ion the Taffspeed headers ?
Re: Taffspeed stainless steel u- pipe
Posted: Mon Apr 15, 2024 1:52 pmAs soon as i have time i intend to see how close the SSC taffy pipe u bend is to the original.
Ive got a gen taffspeed and a few SSC ones.
Ive got a gen taffspeed and a few SSC ones.
Re: Taffspeed stainless steel u- pipe
Posted: Mon Apr 15, 2024 2:54 pmHi Gaz ,
I have an SSC copy lying around somewhere , and from memory they are significantly different . I know that the fitting into the stub is quite a bit smaller diameter for a start .
I have an SSC copy lying around somewhere , and from memory they are significantly different . I know that the fitting into the stub is quite a bit smaller diameter for a start .
Re: Taffspeed stainless steel u- pipe
Posted: Tue Apr 16, 2024 8:38 pmThe taff u pipe fits over the expansion body where the Saigon copy slips inside the expansion body. Plus as you said the Saigon version is probably close to 42mm ( the version I’ve seen is ) where the taff is probably closer to 48mm.
Re: Taffspeed stainless steel u- pipe
Posted: Tue Apr 16, 2024 8:39 pmIf someone is knocking the u pipes up I’d be intrested.
Re: Taffspeed stainless steel u- pipe
Posted: Tue Apr 16, 2024 9:09 pmEarly SSC were 42mm but they went to 48mm. Thwy have had a few changes.
Yes knew the joints were different just wondered if the bend was in the ball park.
Ive also got a 48mm u bend (unknown) that is just the tube with no ends, think it could be just a 48mm AF clubman, will see if thats anywhere near..... When i have some time!
Yes knew the joints were different just wondered if the bend was in the ball park.
Ive also got a 48mm u bend (unknown) that is just the tube with no ends, think it could be just a 48mm AF clubman, will see if thats anywhere near..... When i have some time!