LCGB Forums

The ability to post messages is restricted to LCGB members. Any questions contact us at lcgbadmin@googlemail.com

Max Quattrini 210 kit

Need help with a tuning kit, how do you tune your scooter, which kit should I choose, and all general tuning and modifcations questions are for in here.

Re: Max Quattrini 210 kit

Postby Raveydavey » Sun Jan 21, 2018 7:21 pm

Handed my cases over to Chiselspeed yesterday. Build now under way!
User avatar
Raveydavey
 
Posts: 295
Joined: Wed Jan 28, 2015 8:32 pm
Location: Kettering Massive

Re: Max Quattrini 210 kit

Postby bike grim » Mon Jan 22, 2018 2:09 pm

Just read the scootering article. Sounds a great kit. Are you going with a LTH clutch etc or upgrading standard as the article suggets you could? I’ve got an LTH in my Big cc engine and it’s faultless after 11,000 Miles. Look forward to hearing how it goes.
User avatar
bike grim
 
Posts: 735
Joined: Tue Jun 03, 2014 2:51 pm

Re: Max Quattrini 210 kit

Postby Raveydavey » Mon Jan 22, 2018 3:54 pm

Just going with the AF cassette to keep costs down a bit. This is part of a total 'rust'ore which is collectively is costing me an arm and a leg. I've asked for a bit of transfer work; as far as sensible without welding.
User avatar
Raveydavey
 
Posts: 295
Joined: Wed Jan 28, 2015 8:32 pm
Location: Kettering Massive

Re: Max Quattrini 210 kit

Postby Raveydavey » Fri Jan 26, 2018 10:27 pm

There she blows! :D Just got to finish ‘rust’oring and registering the bike it’s going (back) in to.

https://www.facebook.com/Chiselspeed/po ... 3435833565
User avatar
Raveydavey
 
Posts: 295
Joined: Wed Jan 28, 2015 8:32 pm
Location: Kettering Massive

Re: Max Quattrini 210 kit

Postby Angry Bloke » Sat Jan 27, 2018 12:43 am

Impressive

Looking forward to the road review
User avatar
Angry Bloke
 
Posts: 274
Joined: Sat May 31, 2014 11:03 am
Location: Flying 8 Balls - Norwich

Re: Max Quattrini 210 kit

Postby Watfordwhite » Sat Jan 27, 2018 9:21 am

Nice, yes please a real road review would be great. They turned that around quickly Dave.
User avatar
Watfordwhite
 
Posts: 417
Joined: Mon Apr 11, 2016 7:31 pm
Location: Watford

Re: Max Quattrini 210 kit

Postby Scooterdude » Sat Jan 27, 2018 9:37 am

Yes they turned that round quick, ordered from them last week seem like a great firm to deal with.
Scooterdude
 
Posts: 674
Joined: Fri May 26, 2017 3:45 am

Re: Max Quattrini 210 kit

Postby Scooterdude » Sat Jan 27, 2018 8:10 pm

Raveydavey wrote:There she blows! :D Just got to finish ‘rust’oring and registering the bike it’s going (back) in to.

https://www.facebook.com/Chiselspeed/po ... 3435833565

You got it in yet :lol:
Scooterdude
 
Posts: 674
Joined: Fri May 26, 2017 3:45 am

Re: Max Quattrini 210 kit

Postby bike grim » Sun Jan 28, 2018 8:58 am

That’s some turnaround. That’s the same power and torque as my 283! If they can set that up to be able to sit at sustained high speed runs without overheating then it’s going to be a great engine. Note that Casa are building a clubman Type exhaust prototype for their 265 touring motor. That would be a good addition here with a modified header. The world is great for Lambrettas at the moment.
User avatar
bike grim
 
Posts: 735
Joined: Tue Jun 03, 2014 2:51 pm

Re: Max Quattrini 210 kit

Postby Raveydavey » Wed Jan 31, 2018 7:50 pm

Picking up on Saturday. :D

The bike its going in to should be complete, and registered by 1st March..that's the target I've set myself.Every waking hour is spent thinking about it :lol:
User avatar
Raveydavey
 
Posts: 295
Joined: Wed Jan 28, 2015 8:32 pm
Location: Kettering Massive

Re: Max Quattrini 210 kit

Postby Nudger » Thu Feb 01, 2018 6:02 am

You've done that quick Dave! I'm looking forward to holding you up as I potter along behind you on my standard 150cc :D
User avatar
Nudger
 
Posts: 565
Joined: Fri Jul 04, 2014 4:27 pm

Re: Max Quattrini 210 kit

Postby Watfordwhite » Fri Feb 02, 2018 7:56 pm

So I rode the MQ210 Chiselspeed demo out today. Only a quick spin. God, what can I say. This is bar far the best engine I have ever ridden. I'm no speed freak but had the front wheel off the ground in 2nd. Pulls so well. A very tame ride if you want to, pulls well in each gear from down low to WTF. Clutch was so light. It was an absolute joy to ride. I'm sold.
User avatar
Watfordwhite
 
Posts: 417
Joined: Mon Apr 11, 2016 7:31 pm
Location: Watford

Re: Max Quattrini 210 kit

Postby bike grim » Mon Feb 05, 2018 8:13 pm

Sounds good WW.

In the frame yet Raveydavey?

:D
User avatar
bike grim
 
Posts: 735
Joined: Tue Jun 03, 2014 2:51 pm

Re: Max Quattrini 210 kit

Postby dickie » Mon Feb 05, 2018 8:41 pm

Is the demo bike an out of the box kit plus regular pipe etc or has the barrel etc been tickled?

I seem to recall about 25bhp but 34 with some work done. Or thereabouts anyway.
dickie
 
Posts: 1746
Joined: Thu Oct 02, 2014 12:32 pm
Location: Tyne and Wear

Re: Max Quattrini 210 kit

Postby Solid Air » Mon Feb 05, 2018 9:26 pm

I would be interested in seeing some mpg or ltr per mile figures when they become available. If this kit is as flexible as it seems and proves to be reliable then, in my eyes, it would be good for it not to be a gas-guzzler. If it turns out to be able to balance a quick fun ride (but not too extreme for the average rider) with the ability to rally / tour at a reasonable cost then they'll be kept busy at the MQ HQ surely?
User avatar
Solid Air
 
Posts: 979
Joined: Sun Jun 01, 2014 10:58 pm
Location: Cambridge

Re: Max Quattrini 210 kit

Postby Raveydavey » Mon Feb 05, 2018 11:09 pm

dickie wrote:Is the demo bike an out of the box kit plus regular pipe etc or has the barrel etc been tickled?

I seem to recall about 25bhp but 34 with some work done. Or thereabouts anyway.


The demo bike is a bolt on. No tuning to the barrel.24bhp and 20 torques
just picked my engine up from CST on Saturday , dynod at 27 and 21torques, after mild tuning, ( no welding)

...all numbers on a page at the moment. The proof will be in the riding...
User avatar
Raveydavey
 
Posts: 295
Joined: Wed Jan 28, 2015 8:32 pm
Location: Kettering Massive

Re: Max Quattrini 210 kit

Postby Raveydavey » Mon Feb 05, 2018 11:27 pm

bike grim wrote:Sounds good WW.

In the frame yet Raveydavey?

:D


I wish.. I'm hoping to have the frame ready to install the motor this weekend. Although a lot needs to happen between now and then, the pressure of the forum is adding to the motivation :D
User avatar
Raveydavey
 
Posts: 295
Joined: Wed Jan 28, 2015 8:32 pm
Location: Kettering Massive

Re: Max Quattrini 210 kit

Postby Toddy » Tue Feb 06, 2018 7:06 am

Raveydavey wrote:
bike grim wrote:Sounds good WW.

In the frame yet Raveydavey?

:D


I wish.. I'm hoping to have the frame ready to install the motor this weekend. Although a lot needs to happen between now and then, the pressure of the forum is adding to the motivation :D



Dont let us rush you ;) :lol: :lol: :lol: :lol:
User avatar
Toddy
 
Posts: 9659
Joined: Tue May 13, 2014 9:58 pm
Location: East Yorkshire

Re: Max Quattrini 210 kit

Postby Watfordwhite » Tue Feb 06, 2018 3:38 pm

Raveydavey wrote:
dickie wrote:Is the demo bike an out of the box kit plus regular pipe etc or has the barrel etc been tickled?

I seem to recall about 25bhp but 34 with some work done. Or thereabouts anyway.


The demo bike is a bolt on. No tuning to the barrel.24bhp and 20 torques
just picked my engine up from CST on Saturday , dynod at 27 and 21torques, after mild tuning, ( no welding)

...all numbers on a page at the moment. The proof will be in the riding...

If the out of the box with LI150 gearbox is anything to go by, yours will be a huge grin factor.
User avatar
Watfordwhite
 
Posts: 417
Joined: Mon Apr 11, 2016 7:31 pm
Location: Watford

Re: Max Quattrini 210 kit

Postby Raveydavey » Wed Feb 07, 2018 9:20 am

So far the very trick looking motor has sat resplendently in the kitchen. I've a very understanding missis. Yesterday I set about fitting the cowling. At least that was the plan. I think I've found the first minor challenge. I've 'invested' in some bling PM tuning carbon jobbies (in for a penny and all that). I've spent hours fettling to get them to fit.

The issue is the manifold shape because it's shorter, With the carb in place it fouls the top of the cowl. I've just about got a fag paper's gap between them now. Hopefully it won't vibrate against it when running. We'll see. I remain optimistic.

The rest of the bike is almost ready to assemble. Just waiting for wheels and for my good friend to finish welding damper brackets to the forks. Looking forward to the weekend.
User avatar
Raveydavey
 
Posts: 295
Joined: Wed Jan 28, 2015 8:32 pm
Location: Kettering Massive

PreviousNext

Return to Tuning & Kits

Who is online

Users browsing this forum: No registered users and 8 guests