Page 2 of 2
Re: TV 175/200 Series 3
Posted:
Wed Oct 29, 2014 2:00 pmby GeneM
Andyf wrote:wow! knew nothing about that! this Forum never ceases to amaze and enthral, could we (I) see a pic please?
Footboard would look like this for these early models. Seeing if I have a plastic I can take a pic of as well...
you would also see a half circle cut out on the L bracket the footboard attaches too
Re: TV 175/200 Series 3
Posted:
Wed Oct 29, 2014 2:04 pmby GeneM
if this is of interest: factory layout of cables/wiring under the legshield
Re: TV 175/200 Series 3
Posted:
Thu Dec 04, 2014 3:22 pmby Dimitrios_231
Early TV175 S3,
can I use black tank straps?
Re: TV 175/200 Series 3
Posted:
Mon Dec 08, 2014 3:23 amby lambrettatastic
Mine has...it's early '62.
Re: TV 175/200 Series 3
Posted:
Mon Dec 08, 2014 10:03 amby Dimitrios_231
Cheers
Re: TV 175/200 Series 3
Posted:
Tue Dec 09, 2014 7:27 pmby Dimitrios_231
What is this hole for?
What was Ferdinando thinking about it ?
There is a small hole on the cross member of an early TV,kickstart side only.
I was thinking that the previous owner did it.
Similar footboards.
Re: TV 175/200 Series 3
Posted:
Tue Dec 09, 2014 7:37 pmby Dimitrios_231
Early model,
which one is the proper flywheel cowl?
Both are Innocenti.
Re: TV 175/200 Series 3
Posted:
Tue Dec 09, 2014 8:59 pmby Digger
Re: TV 175/200 Series 3
Posted:
Wed Dec 10, 2014 12:17 amby Dimitrios_231
I found this:
Antivibration Plugs: The Series 3 machines had 4 anti-vibration plugs fitted to the flywheel cowling from the following frame numbers:
TV 175 (Series 3) - frame number 508889 onwardsLink
http://www.britishlambrettaarchive.co.u ... s-3-1.html
Re: TV 175/200 Series 3
Posted:
Fri Jan 09, 2015 2:56 pmby GeneM
The extra little hole in that footboard was drilled by someone later - no idea what for but it wasnt stock
Re: TV 175/200 Series 3
Posted:
Sun Jan 11, 2015 5:00 pmby Dimitrios_231
Cheers.
Re: TV 175/200 Series 3
Posted:
Thu Jan 15, 2015 1:14 amby lambrettatastic
Can anyone help....the badge on the back of my seat is missing....should it read innocent ? Anyone have one off an old seat cover?...many thanks.
Re: TV 175/200 Series 3
Posted:
Fri Jan 23, 2015 4:40 amby lambrettatastic
Anyone??
Re: TV 175/200 Series 3
Posted:
Fri Jan 23, 2015 6:35 amby Digger
I would have thought it would be the name of the seat manufacturer?
Re: TV 175/200 Series 3
Posted:
Wed May 20, 2015 2:30 pmby Dimitrios_231
Re: TV 175/200 Series 3
Posted:
Sun Aug 09, 2015 7:47 pmby jonw
What year was the metallic blue paint introduced and where is the best info for the Series 3 TV range please.
The reason for asking is that I'm interested in buying a S3 TV175 and am trying to gather as much info before I start looking at one to buy.
Obviously I have this site for reference, British Lambretta Archive and Sticky's book which all provide good info... just wondered if there are any further sites etc I might be unaware of?
Re: TV 175/200 Series 3
Posted:
Mon Aug 07, 2017 11:31 amby wurzel
Hi folks, was after a bit of information regarding the Series 3 TV 200.
I've just been to look at one over the weekend and the frame number
has the correct TV3 prefix followed by a frame number 5490++ but the frame
is non chrome ring.I know that the very last few 200s and 175s didn't have
the chrome ring but were they changed this early ?
If anyone can shed any light on this it would be really appreciated.
Regards Mark
