LCGB Forums

The ability to post messages is restricted to LCGB members. Any questions contact us at lcgbadmin@googlemail.com

Sh22/2 jetting

Want to know which carb to choose? Having problems setting up the jetting details on your scooter? Wheter you are using a standard or tuned carb, ask your question here.

Sh22/2 jetting

Postby Scooter Paul » Mon Aug 26, 2019 4:52 pm

Remind me please, carburation just over tickover , regulated by atomiser or slide? I have a slight hesitation but the rest of the Rev range is crisp and clean.
Scooter Paul
 
Posts: 368
Joined: Fri May 30, 2014 9:41 am

Re: Sh22/2 jetting

Postby Fast n Furious » Mon Aug 26, 2019 11:42 pm

Pilot jet then throttle slide. Throttle slide controls the mix up to about 1/4 throttle.
Check that you have the correct slide and pilot jet.
Check that the slide and carb housing are not worn.
Try a borrowed carb and see what difference that makes.
User avatar
Fast n Furious
 
Posts: 742
Joined: Sat Nov 19, 2016 3:56 am
Location: York

Re: Sh22/2 jetting

Postby Scooter Paul » Tue Aug 27, 2019 9:37 am

Fast n Furious wrote:Pilot jet then throttle slide. Throttle slide controls the mix up to about 1/4 throttle.
Check that you have the correct slide and pilot jet.
Check that the slide and carb housing are not worn.
Try a borrowed carb and see what difference that makes.

Thanks.
Scooter Paul
 
Posts: 368
Joined: Fri May 30, 2014 9:41 am


Return to Carburettors

Who is online

Users browsing this forum: No registered users and 0 guests