Technical help for Series one, two and three Lambrettas. Models include the Li, Li Special, TV, SX, GP, Serveta and API/SIL models
by Hammer RB230 » Tue Sep 21, 2021 12:16 pm
Hi All i have recently fitted the above to my LI RT195 after my indian stator gave up. I have fitted and timed (25 deg BTDC) as per the fitting instructions. Starting is great, however mid range to full throttle is missing badly, TDC was found by the piston stop method and the 25 BTDC using a timing disk.
Any ideas would be greatly appreciated.
-
Hammer RB230
-
- Posts: 25
- Joined: Fri Oct 30, 2015 9:31 pm
by Warkton Tornado No.1 » Tue Sep 21, 2021 5:17 pm
If it's 'missing' as you say, then the strobe should have indicated that.
You have run it with a strobe to check retardation, I presume?
-
Warkton Tornado No.1
-
- Posts: 2116
- Joined: Sun Jan 11, 2015 1:27 pm
by Hammer RB230 » Tue Sep 21, 2021 7:51 pm
Yes I did strobe, I didn't notice anything wrong, might need to re check !
-
Hammer RB230
-
- Posts: 25
- Joined: Fri Oct 30, 2015 9:31 pm
by Warkton Tornado No.1 » Wed Sep 22, 2021 12:59 am
Most strobes rely upon induction from the HT lead to flash, so it's fairly obvious if there is anything amiss. Hopefully it may just be the sparkplug, which I bet is an NGK
Personally, I've never known a fussier brand....
-
Warkton Tornado No.1
-
- Posts: 2116
- Joined: Sun Jan 11, 2015 1:27 pm
Return to Series 1, 2 & 3
Who is online
Users browsing this forum: GEZMAC, Google [Bot], Richie and 34 guests