LCGB Forums

The ability to post messages is restricted to LCGB members. Any questions contact us at lcgbadmin@googlemail.com

Imola 186 inlet manifold split

Technical help for Series one, two and three Lambrettas. Models include the Li, Li Special, TV, SX, GP, Serveta and API/SIL models

Imola 186 inlet manifold split

Postby Norrie Bodge » Tue May 15, 2018 3:31 pm

Lads
A mate has an imola 186 kit that’s done approx
350 Miles since built & the rubber has split!!
Which is fine?

But on stripping it off for him, the rubber/manifold
Is all one piece?? Has anyone had this issue ?
& has a way of fixing this ?

Image

Cheers
Norrie Bodge
 
Posts: 281
Joined: Sat Aug 16, 2014 3:34 pm

Re: Imola 186 inlet manifold split

Postby HxPaul » Tue May 15, 2018 3:45 pm

User avatar
HxPaul
 
Posts: 1212
Joined: Fri May 30, 2014 9:18 am
Location: Halifax

Re: Imola 186 inlet manifold split

Postby soullad » Tue May 15, 2018 3:58 pm

What carb size is it for, a 28 / 30 mm dellorto phb type carb
Would the newer type inlet manifolds with a bolt on rubber flange not work?
soullad
 
Posts: 202
Joined: Sun Jun 01, 2014 8:34 pm
Location: Flying 8 Balls SC. Norfolk

Re: Imola 186 inlet manifold split

Postby St George » Tue May 15, 2018 5:10 pm

I have one of those in a box of spares, the rubber pushes on and locks on a ridge, the carb does the same. It came with my 30 mm Oko.
St George
 
Posts: 602
Joined: Fri May 30, 2014 3:48 pm

Re: Imola 186 inlet manifold split

Postby gaz_powell » Tue May 15, 2018 5:34 pm

Cut the rubber off and use hose???
gaz_powell
 
Posts: 1158
Joined: Sat May 31, 2014 7:56 pm
Location: Hartlepool

Re: Imola 186 inlet manifold split

Postby Norrie Bodge » Tue May 15, 2018 5:42 pm

St George wrote:I have one of those in a box of spares, the rubber pushes on and locks on a ridge, the carb does the same. It came with my 30 mm Oko.


Pm sent m8
Norrie Bodge
 
Posts: 281
Joined: Sat Aug 16, 2014 3:34 pm

Re: Imola 186 inlet manifold split

Postby Norrie Bodge » Tue May 15, 2018 6:28 pm

soullad wrote:What carb size is it for, a 28 / 30 mm dellorto phb type carb
Would the newer type inlet manifolds with a bolt on rubber flange not work?


It’s for a 28mm PHBH m8
Yes they the better option but at £100+
He’s a bit miffed that it looks like the one he has can’t just be replaced ?

He’s on cutting the rubber off now
I will post up later how the manifold looks when off
Norrie Bodge
 
Posts: 281
Joined: Sat Aug 16, 2014 3:34 pm

Re: Imola 186 inlet manifold split

Postby Norrie Bodge » Tue May 15, 2018 6:33 pm

Image

Image
Norrie Bodge
 
Posts: 281
Joined: Sat Aug 16, 2014 3:34 pm

Re: Imola 186 inlet manifold split

Postby soullad » Wed May 16, 2018 4:58 pm

Norrie Bodge wrote:
soullad wrote:What carb size is it for, a 28 / 30 mm dellorto phb type carb
Would the newer type inlet manifolds with a bolt on rubber flange not work?


It’s for a 28mm PHBH m8
Yes they the better option but at £100+
He’s a bit miffed that it looks like the one he has can’t just be replaced ?

He’s on cutting the rubber off now
I will post up later how the manifold looks when off



I might have an unused 28/ 30 mm inlet with spare flange, will check mate
soullad
 
Posts: 202
Joined: Sun Jun 01, 2014 8:34 pm
Location: Flying 8 Balls SC. Norfolk

Re: Imola 186 inlet manifold split

Postby Norrie Bodge » Wed May 16, 2018 9:35 pm

soullad wrote:
Norrie Bodge wrote:
soullad wrote:What carb size is it for, a 28 / 30 mm dellorto phb type carb
Would the newer type inlet manifolds with a bolt on rubber flange not work?


It’s for a 28mm PHBH m8
Yes they the better option but at £100+
He’s a bit miffed that it looks like the one he has can’t just be replaced ?

He’s on cutting the rubber off now
I will post up later how the manifold looks when off



I might have an unused 28/ 30 mm inlet with spare flange, will check mate



Cheers soullad appreciate you looking m8
Pm me if any joy plz
Norrie Bodge
 
Posts: 281
Joined: Sat Aug 16, 2014 3:34 pm


Return to Series 1, 2 & 3

Who is online

Users browsing this forum: Baidu [Spider] and 3 guests